Steve TDI Posted June 5, 2009 Report Share Posted June 5, 2009 (edited) I'm going to be fitting it either tonight or tomorrow depending on the rain. For the people that have done this before, what would you say to look out for so everything goes smooth?1. (white) ECU 46 cruise on/off2. (Blue) ECU 45 Resume3. (red) ECU 44 Set4. (Black) ECU 14 Enable cruise (& connect to ignition 12V for stalk)Are these numbers etched on the plastic somewhere (44, 45, 46 and 14).Can I use the pins in the plug instead of buying new ones? Edited June 7, 2009 by Steve TDI Quote Link to comment Share on other sites More sharing options...
MrBiscuit Posted June 6, 2009 Report Share Posted June 6, 2009 (edited) I'm going to be fitting it either tonight or tomorrow depending on the rain. For the people that have done this before, what would you say to look out for so everything goes smooth?Are these numbers etched on the plastic somewhere (44, 45, 46 and 14).Can I use the pins in the plug instead of buying new ones?Yep the terminals are numbered, you need to pull out both connector banks, as I think 14 is on one and the rest on the other.There are plenty of unused pins as all are fitted, so some spare for trial removal.You'll need to find a 12v ignition feed from somewhere in the car too.I used the radio switched 12v, others have used the brake switch 12V.take your time, be gentle with the ECU connector, but it can be stiff to get off.Jons guide is excellent, study that first.Wish you luck, specially with the airbag, gave up on mine, two screws just turned without undoing, got a refundon the stalk, and kept my two toggle switches. Edited June 6, 2009 by MrBiscuit Quote Link to comment Share on other sites More sharing options...
Steve TDI Posted June 7, 2009 Author Report Share Posted June 7, 2009 Cheers Mr B.One thing about the 12v feed. I thought the black into 14 was the 12v feed. If not, which wire do you use for the 12v feed? Quote Link to comment Share on other sites More sharing options...
Steve TDI Posted June 7, 2009 Author Report Share Posted June 7, 2009 Got it all fitted now. All wired up correctly (fingers crossed). Now to find someone / buy a cable and pinch a mates lap top / convince the garage where I used to work (if his diagnostic program can do that) / bribe someone a Seat/VW to turn it on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.