willooon Posted September 9, 2008 Report Share Posted September 9, 2008 i have a ripsped headunit in currently but it is hard to bit properly because there is not much room behind the headunit for the wiers, and sumtimes pops out. Would this be a problem with a double din headunit? or do i have to take that rear piece of plastic out which does not seem to so much..any help would be much apreciated thankyou! Quote Link to comment Share on other sites More sharing options...
vpolo Posted September 9, 2008 Report Share Posted September 9, 2008 it should fit as long as u hide the wires to the right and left of the dash Quote Link to comment Share on other sites More sharing options...
fatttty Posted September 9, 2008 Report Share Posted September 9, 2008 as above, you have to pack as much of the wires into the dash, feel inside theres space to the left hand side. Quote Link to comment Share on other sites More sharing options...
alex#65 Posted September 15, 2008 Report Share Posted September 15, 2008 Ive just put a kenwood double din tv dvd thing in mine and it fits perfect. i just pushed all the cables in the sides behind the plasic, its has gaps top and bottom.Just try to keep the loom connections to a minimum and it will be fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.