RichC Posted February 8, 2007 Report Share Posted February 8, 2007 Hoping to install my Alpine 9835R tonight (thanks to Joe for the spare 'stowage shelf')Now I'm sure I read on here somewhere that I can't just plug and play on the ISO adapters.. nothing major but two of the cables I need to switch.Thing is I'm blowed if I can find the reference again....Am I imagining it style="vertical-align:middle" emoid=":confused:" border="0" alt="confused.gif" /> , or can someone point me in the right direction.TIA..... Quote Link to comment Share on other sites More sharing options...
Babs Posted February 8, 2007 Report Share Posted February 8, 2007 probably something about the power cables?red and yellow, and a Y-splitter? Quote Link to comment Share on other sites More sharing options...
NOCK Posted February 8, 2007 Report Share Posted February 8, 2007 I had this problem. Basically just play around with switching the red and yellow wires until it works. Mine worked fine without switching wires, but it lost its memory whenever i turned the engine off. So i switched the red to yellow and the yellow to red and now it works great. (Mine is pioneer but they all work pretty similar i should think).Good luck, it sounds harder than it is (did to me anyway lol).NOCK Quote Link to comment Share on other sites More sharing options...
RichC Posted February 8, 2007 Author Report Share Posted February 8, 2007 Cheers all - that sounds like what I remember. Think it'll be a plug and play tonight, just to get the HU in. Then have a proper plpay with the wiring etc over the weekend and hopefully get the iPod adapter wired in as well Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.