-
Posts
20 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Everything posted by Polo6C
-
I dont know for sure but i think it only fits lupo's/polo's that has the buttons under the heater control. or it replaces that & you will have to put the buttons under the heater controls. ( im not sure tough )
-
No everybody on this topic haha
-
Car is running again, changed the fuel pump thanks for all the help
-
on the pump where u connect the plug. The 2 outer pins. i saw it on youtube that u shoud have 1-3 resistance but my multimeter doesnt do anthing
-
i tested the resistance on the 2 outer pins from the pump & my meter does nothing. so pump should be broken ordering one tommorrow! thnx!
-
i removed the fuel filter & there was no fuel comming from the pump to the filter
-
i just tested that & there is no fuel comming trough.
-
it gets 12v when i crank the car & 3v with contact on. is it supposed to get 12v then?
-
so is my pump broken ? i really dont know what else i can do now.
-
i cant hear the pump is it normal the brown wire doesnt get voltage?
-
I have checked it & the red wire gets 12V when i crank the engine. the brown wire gets nothing. i tested the other 2 wires & the purple one gets voltage too
-
im gonna check that now ! how can i test the plug the right way ? thnx
-
i checked the fuel pump fuse voltage & it only gets 3 volts. EDIT !!! When i crank the car the fuse gets 12V. so the fuel pump relays clicks when i turn on the ignition where can the problem be? thnx!
-
Checked all my fuses today & they are all okay. dont really know what sound a fuel pump should make. ive read today the fuel pump or fuel relay dont give a vagcom code so this can maybe be the problem.
-
I now think its maybe a fuel problem because i keep starting over & over the spark plugs dont get wet. also read something about a blown fuse but i think they give error codes on vagcom.
-
Hi! My lupo didnt start 2 weeks ago so i used vagcom & i got fault code G28 Engine speed sensor. I replaced the sensor & it still doesnt start. Error code is gone. After that vagcom gave me error code: 18010 - Power Supply Terminal 30: Voltage too Low P1602 - 35-10 - - - Intermittent This error code usually comes after disconnecting the battery. but just to be sure i replaced the battery because it was still a old full calcium one. So what i replaced from the ignition : ( new parts ) Battery , coil pack , spark plugs , engine speed sensor (Crankshaft sensor) (G28), all ignition cables No more vagcom codes & car wont start, it just keeps cranking. Only thing i can think of now is the starter motor, i dont know if they give error codes? what u guys think? thanks!
-
Crankshaft sensor on AUD engine.
Polo6C replied to Polo6C's topic in Car Care, Maintenance and Mechanical
thanks guys i will look at it tommorrow ! -
Crankshaft sensor on AUD engine.
Polo6C replied to Polo6C's topic in Car Care, Maintenance and Mechanical
i cant seem to find it, i have took a picture from the starter underneath the car. from looking at the picture,where do u think the sensor sits? thnx! -
Hi guys, where can i find the crankshaft sensor on a AUD Engine? have already searched google, ELSA & workshop manual without success! thnx !
-
Hi guys ! Im 21 & i Live in Belgium. Cars i own now : Lupo 1.4 Polo 6C 1.2 TSI Corsa C 1.2