Mattymdm
-
Posts
61 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Calendar
Posts posted by Mattymdm
-
-
Have you tried getting gears without the engine runnning? If you can get gears fine with the engine running this would indicate a clutch issue.
-
1
-
-
Sounds like a synchro issue. Take the box out yourself and someone will be able to refurbish it for you.
-
I put 195/45 Uniroyal rain sport 3's on my Gti. No complaints since Toyo proxies are the worse tyres I've experienced.
-
Great video and review
You've made a cracking car Clayton! 👍
-
1
-
-
On 4/21/2018 at 9:18 AM, Mr.Badbrains said:
Here is an easy and cheap fix for noisy window regulators. Whenever I closed the doors while windows were down there was a nasty rattle. Turned out the plastic sliders were worn out and loose.
Replaced those and greased the guides and its all good and silent.
Did you have any problems after fitting? I've fit some to my drivers window today and now it no longer goes up.
-
Who doesn't want a set 😂. Doubt you'll find anyone wanting to sell a set and if you do it'll be expensive.
-
Looking good. Videos of the exhaust would be nice ?
-
On 4/21/2018 at 9:18 AM, Mr.Badbrains said:
Here is an easy and cheap fix for noisy window regulators. Whenever I closed the doors while windows were down there was a nasty rattle. Turned out the plastic sliders were worn out and loose.
Replaced those and greased the guides and its all good and silent.
Where can i find those? Didn't realise it was a problem until i saw this.
-
What colour?
-
GLWS.
Seen this in person once and it blew me away with how clean it looked.
-
Rechecked. 85c one side 75c the other but only 44 coming out of the vents.
Going to check the temp flap on the heater box to see if its jammed or not going to it most warm position
-
7 hours ago, Rich said:
flap.
Common issue? Fit a heater temp control to flap cable a while ago but nothing changed
-
14 hours ago, FlipFlops said:
Man's not hot
Man's bloody frozen!
65c in one side of matrix. 50c on the other side with fan speed 2.
-
I own a Grey GTi. 52plate but on a 3 chassis.
-
Hi guys. My heater blower isn't very hot. Its warm but not hot. Just wondering if anyone could tell me the temp coming from there vents on there car so i can compare.
Mines a 2002 GTI.
No engine temp issues.
Blower flap for heater is moving correctly.
Suspicions points me towards a blocked heater matrix.
Thanks in advance!
-
17 hours ago, Jacamo97 said:
How are you guys getting them so cheap ?? how long ago was that? Haha
This was used. And about a month ago it popped up for sale.
-
Janspeed all the way. Plenty of videos so you know what its going to sound like. Personally don't like custom as you'll never know what it sounds like until you've paid and drove away.
Tough to find a janspeed, I've been looking for 2 years. last one was £200 and snapped up in minutes with 4 others waiting for the sale to fall through!
-
Them wheels look spot on. Standard bathursts are great but these are even better!
What suspension you running and how much you lowered by?
-
9 hours ago, JoeyEunos said:
Really
Seen some go for 5-6k depending on history and mileage
-
Well too cheap for a anthracite!
GLWS
-
1
-
-
The loom may look OK but you could still have a wiring issue. Or the Engine ECU can no longer read the signal from the G28.
Don't loose hope though it can be fixed.
Had a 106 Gti myself. Such a nightmare car aswell the lupo is in a different league.
-
Which make sensor did you buy?
Logged the same fault i can see P0321. If you've fit a sensor you'll have to go down checking the wiring route
-
On 5/18/2017 at 8:37 PM, gtige0rge said:
Cheers buddy!
Ordered it well over two years ago now but I'm sure Janspeed discontinued them
Such a shame its the only exhaust i fancy on my GTi. Becuase i know what it sounds like. Was going to go custom but never know what it'll sound like until its done and on.
-
Car looks great man!
When did you order the janspeed? Desperate for one for mine but cant seem to find them new anymore or any used ones either!
KW V2 Inox-line coilovers Lupo/Arosa
in Parts For Sale
Posted
Did these come off a GTi?