max West-York
-
Posts
615 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by max West-York
-
-
Hi,I'm Max, 19 from west yorkshire and i bought my silver 1.4S lupo last week
Its a 2002 with 47k miles, 1 prev owner and FSH
Havent done much to it yet other than the essentials, new bulbs, debadged boot, bit of painting on interior trim, fitted new kenwood head unit and edge 12" 350rms active sub.
Started taking my door bump strips off this morning but only had time to get 1 done and it still needs cleaning as you can see slightly in the pictures
Got a set of staggered 14x8 14x7 RH cups in black on at the moment, 195/45/14s all round, running them through winter and refurbing in spring when ive decided what my colour scheme and/or theme is going to be
Its not on coils yet either but i just got a couple of mates in the back so it isnt on stilts, ill have it about 30-40mm lower than the pics when its on coils cos its going to be my daily and im on the motorway a lot
-Future plans are, coils obviously,
-Bonnet notch smoothed with badgeless grill
-Colour coded rear bumper (think im leaving front black as i prefer it black on the lower half)
-Smoothed front plate recess
-Dewipered with glass blank
as well as a load of other various little bits and pieces
Only working part time atm cos of uni so only brining in 130 a week and paying rents back 35 a week so budget isnt the best, but ill get it there by next summer i think
and thats about all ive got at the moment!
-
ooh forgot about this
managed to get them out and get headlinging out in the end
Thanks anyway
-
This grill... anyone know where I can get one? Link in the post isn't working. It's like the ABT grill without the annoying bit to put an ABT badge on...
its probably a dealer part but i found this
kinda similar
-
i know this is an old topic but ive got everything on my headlight removed apart from the 2 small sun visor clips at the front, i cant seem to get them off, no matter what i do
any help?
Thanks
-
I dont know if this helps, but im getting mine from here http://www.flyeyeskit.co.uk/, its cheap but i dont know if its looks as good as the other.
ive used these before, i wouldnt recommend them, theyre awful to use, rip really easy and dont look too good in person
-
Porsche adapters always adapt from vw centre bore to Porsche centre bore.
Audi centre bore is the same as vw, so they're correct anyway.
No spigot rings needed.
oh right nice one, thats perfect then as i prefer the pepperpots as well
gna look about for some cheap ones i can polish up over winter
-
Thinking of getting audi pots or some dials, just need to know which adapters would be the cheapest of the 2 and how cheap i could get each for
audi 5x100
porsche 5x130
Also could i get direct fitment ones? (so the adapter inner c.b is 57.1 and the outer cb on the wheel face is the same size as the wheels c.b?)
if they do im guessing it would be a custom job so spigots would probably be cheaper anyway?
Thanks,
max
-
vaux centre bore is lower than vw isnt it??
-
does anyone have pictures of these on a loop?
also, im guessing they wont fit the 1.4 non sport models without rubbing/sticking out too much?
-
I think mine was about £30 a headlight as i bought 2 sheets incase i messed up.
I just got it off the LaminX website.
ouch thats pretty steep
if im only wanting a light smoke (just to basically get a less chromey look) would i be better off with cheap e-tech rattle cans of tint spray?
-
I didnt even heat it up, really workable as soon as you take it out the packet, you can pull it back off if you make a mistake too. Small air bubbles just come out on their own too, no need to pop them.
oh right sick, how much is it, ive seen it for like £30 when i did a quick search, is that about right?
-
This is mine using the darkest LaminX available. I didnt notice any reduction in light transmission at all, but it does say it will only reduce by a maximum of 10% for the darkest tint. Worth every penny too!
oh right nice one
i just want a like smoke effect on mine so thats good news
is it easy stuff to apply? just like vinyl, bit of heat and stretch?
-
I looked into doing this recently but didn't for various reasons. But i do have around 6m x 1.4m of self adhesive transparent vinyl if you want it? Would happily send it to you for postage costs, costed me around £15 but its just filling my boot up at the moment and I have no use for it. PM me if you're interested.
Gilly.
Thanks man, how much would postage be to HX2?
i think im going to just use rattle cans of clear laquer, itll give a less glossy/reflective finish so wont be a problem with the t-section on the dash
Though if it doesnt come out well ill have to use vinyl instead
Max
-
i thought id seen something about it on here before!
ive seen that thread before as well but couldnt find it again
cheers scotty
-
Right ill have to have a look about then
Going to see the new car tomorrow night and get my deposit down, then pick it up at the weekend
-
Cover them with vinyl?
oh yeah, that could work
this sort of stuff? http://cgi.ebay.co.uk/Self-Adhesive-VINYL-05-CLEAR-TRANSPARENT-2m-x-45cm-/120624108021?pt=LH_DefaultDomain_3&hash=item1c15c1d1f5
which would give a better looking finish?
-
Im thinking of doing something abit different with my interior trim, want to use loads of cut up pictures from magazines etc and make collage style... things on all the trims parts
Just wondered what the best way to do this would be
I was just thinking pvc glue to hold them down and then finish with a layer of lacquer?
any advice as to whether this would work or any other alternative/better method would be great thanks
-
looks good, does it effect the light transmission much?
want to avoid spray tints as they usually dull the light a lot :/
-
Whats the largest size (in inch or cm) speaker you can get into the tweeter space? and still beable to put the covers on
Thanks
-
Hi, getting my new loop tomorrow night, one of the first things ill be doing is tinting the heads, how would i get the headlight into piece to spray the inside?
Thanks
Max
-
Nice one thanks guys, still havnt got the loop yet, getting beyond a joke, i cant wait to get it though
Thanks for the help
-
Cheers man, never thought to search it like that, wasnt showing anything when i put 57.1 64
-
Does anyone know where i can pick up some cheap spigots for a 64mm outer diameter
Thanks
-
To be quite honest bud there probably ain't many places that would take this kind of work on mainly cus it takes time and time to smooth n blend plastics and labour costs cud escalate, it's ok getting it done cheap but chances are the blends will crack quickly, I use to work for a Bodyshop in S****horpe called MSM vehicle refinishers theses boys have done alot of custom work in the past and had alot of mag features but aren't cheap
Hope iv helped in anyway
Gaz
Thanks man, i just want the front end smoothing, i know the bonnet notch is just a welding job so not as expensive but i would like the rest of the work doing as well, ill just have to save up and get it done well
Ello :)
in New member?
Posted
halifax