Search the Community
Showing results for tags 'remote'.
Found 4 results
Yalch posted a topic in Volkswagen LupoRemote central locking just suddenly stopped working today on our Lupo 1.4s Details: Door works fine with key. When I use the key in the passenger side lock it activates central locking and unlocks the rest of the car, same with locking also. When I use the fob it unlocks the drivers door and boot but not the passenger door. Same with locking. When I use the fob I can hear the passenger door trying to lock or unlock but it doesn't move the pin. When passenger door is locked you cant unlock door from inside with the door handle. Is the whole unit bust and therefore I need to buy one of these: Lock Mechanism Or is there something I can do to fix it? Thanks, Jon
Sorry for the long post as well it's a lot to read Okay so to start of this is my first time ever installing something like this in a car, I followed the instructions that come with the kit however when I fitted my new active subwoofer in my car I thought all had gone well it turned on and played music through it, however the subwoofer does not turn off when I remove the key from the car. I have googled this and it said something about the remote turn on wire which for me is on the back of the head unit and is a blue and white wire. The cable that come with the subwoofer is blue not that it matters as its a remote turn on wire for the sub but I ran this wire through the car to the head unit and then I have wired the blue wire with the kit to the remote wire on the back of the head unit which was the blue and white one.....I did this by simply cutting the wire in half and then joining them together with the blue wire from the subwoofer creating a "T" junction effect. I have not got a photo of this part however in the images you can see that I have had to tape up the blue and white again while I try and find a solution haha Note:I had wired this all up before turning the sub on for the first time I didn't add the remote wire after. Sorry for the amount of detail but really not sure on what the problem could be I can have links to photos if it helps as well. Thanks to anyone who can help me Active subwoofer: Edge EDB12A 2014 model Car: VW Lupo W reg (2000) Head unit: jvc kw-xr811 http://www.manualslib.com/manual/488544/Jvc-Kw-Xr811.html?page=2#manual (Wiring/ install manual for help.) Okay so I had a second look today at this issue and I was thinking if it was possible to wire it in with the yellow wire from the iso harness as this gets 12v when the ignition is on and then goes off when the key is removed? If this is even right? this is what I mean: https://i.imgur.com/nBpyd5q.jpg I have some photos to show how the ISO harness is done I had to change the yellow and the red wires around as the Unit was not remembering anything when I turned the car off so that's why. When I first tried this by linking it up with the yellow 12v wire it made the car ignition go backwards the stereo would only come on once the car had gone from ignition to off it would not come on otherwise even if the car was started so not sure on that. I also am not sure how to show images so I have had to post links to them as well https://imgur.com/a/N8lss
I just tried to install the remote central locking to my car. took the trim off and there is only one block instead of three does that mean I can't put remote central locking in my car? Or are they somewhere else?