Jump to content

Lupo 1.4 16v cold start problem


Tjp8
 Share

Recommended Posts

Basicly cut a long story short,

Bought lupo with a bad engine , put a new engine in with only 30k onit, started her up and from cold it didn't want to idle so u have to keep the revs up and after a few mins itl idle on its own ,

So I cleaned the tb, and had it reset/realigned and still had problems, so replaced the sensor thats on the side of the inlet manifold, oil pressure sensor was changed because I broke the last one , also cleaned the egr, inlet manifold , breather pipes, new oil filter , plugs , leads , coil pack, coolant temp sensor, ( had all these parts spare from old engine which ran fine but engines head gasket was gone)

The battery is fine and also is the alternator , when the car is running is works perfect its literally just on start up when its cold.

Any help will be greatly appreciated :)

Link to comment
Share on other sites

  • 2 weeks later...

Can anyone suggest anything ? It's literally just on start up like its not getting choke or something as when its warm its fine .?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.