s11ybm

Thanks for the info. They tyres on them are 155/55r14, I assume they would be ok on a lupo too? Also what coilover sets do you guys recommend? and how much lower would it need to be too look decent?

Thanks mate. Do you think the same adapters which were used on the polo fit on the lupo?

Hi, I've got a chance to get hold of some 1980's mercedes sl wheels. I know that they are 5 stud, so probably need adaptors. They are 14" 6j et30, I'm still waiting to here what the bore size is. But if the bore is correct would the fit the lupo? If so what size tyres? The guy had them on his mk4 Polo, hence I'm thinking they might fit Cheers

Nope not yet...Its MPI..not sure of the engine code..will need to check. How did you remove your EGR Valve?

Thanks.. Was looking for someone who has done this before for guidance...

hi all, Just in the middle of trying to give the egr valve a good clean.. I'm using this guide http://forums.clublupo.co.uk/index.php?showtopic=86131 But I cannot get the egr valve off, i've undone the two bolts..but the valve doesn't budge... What I need to know is that are there any other bolts to undo for the 1.0 egr valve? Cheers Shyam

VW only £2 more thanks for the tip

I replaced the HT leads earlier this year. I had the AA out over the weekend, they done a scan and it came back with fault code P0322. They said the camshaft sensor needs replacing. Any know the best place to get the sensor? Eurocarparts have it for £30.. Is it best to get a VW one?

Cheers david...I thought that was the case! Just had a thought..i may give AA a ring, i'm sure they have the ability to read faults.

Hi All!! I need some assistance. In June the car wasn't driven or even started for a few weeks (3-4weeks). Now every time we take the car out, the engine management light comes on, and after a while either the epc light comes on and car doesnt go past 3000 revs or the car cuts out when its stopped ,followed by the epc light. I'm going to take it to a garage tomorrow, but wanted an idea of what could be wrong. Also is there anyone in the Ilford/Essex area that can kindly plug the car in to a VAG-COM to see what faults there are? Thanks

Cheers, how much for the panel? Would you post?

You got the front indicator panel? Where abouts you located?

That's a shame. I'm in London, you not passing by anytime are you?

You willing to post?

Thanks for the info. I had a look on Venom, but they don't seem to do them. Any idea how much custom made ones cost?