Jump to content

Polo6C

Members
 View Profile  See their activity

  • Posts

    20

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Posts posted by Polo6C

  7. Car wont start

    in Car Care, Maintenance and Mechanical

    Posted

    18 minutes ago, Pete said:

    I'm not sure, I would've thought it should get 12v the whole time when it's operating, like when it kicks in the prime the system when you open your door. Have you tried taking the fuel filter line to the engine off and seen if fuel is pushed through the filter when the car is cranking?

    i just tested that & there is no fuel comming trough.

  11. Car wont start

    in Car Care, Maintenance and Mechanical

    Posted

    1 hour ago, Rich said:

    flip passenger seat, undo three screws on a cool looking black panel.

    turn the ignition on and listen for a noise.

    if you hear nothing take the plug off, check the brown and red plugs have 12v.

    **** the top of the pump if necessary.

    I have checked it & the red wire gets 12V when i crank the engine.

    the brown wire gets nothing. 

    i tested the other 2 wires & the purple one gets voltage too 

  13. Car wont start

    in Car Care, Maintenance and Mechanical

    Posted · Edited by Polo6C

    21 hours ago, Rich said:

    if you chuck 12v at the fuse you will know.

     

     

    i checked the fuel pump fuse voltage & it only gets 3 volts.

     

    EDIT !!!

    When i crank the car the fuse gets 12V.

     

    so the fuel pump relays clicks when i turn on the ignition

    where can the problem be?

    thnx!

  14. Car wont start

    in Car Care, Maintenance and Mechanical

    Posted

    20 hours ago, Mobieus_uk said:

    can you hear the fuel pump kick in when you turn on the ignition?, if not check the fuses

    Checked all my fuses today & they are all okay.

    dont really know what sound a fuel pump should make.

    ive read today the fuel pump or fuel relay dont give a vagcom code so this can maybe be the problem.

  15. Car wont start

    in Car Care, Maintenance and Mechanical

    Posted

    12 minutes ago, Mobieus_uk said:

    check all the earth connections from battery to chassis, and other earth connections you can find, simply find them all clean them up and stick them back on, a bad earth is just as bad as a bad live connection

     

    if it its cranking its unlikely to be the starter motor, unless its quite obviously cranking slow, check for spark then check for fuel

    I now think its maybe a fuel problem because i keep starting over & over the spark plugs dont get wet.

    also read something about a blown fuse but i think they give error codes on vagcom.

  16. Car wont start

    in Car Care, Maintenance and Mechanical

    Posted

    Hi!

    My lupo didnt start 2 weeks ago so i used vagcom & i got fault code G28 Engine speed sensor.

    I replaced the sensor & it still doesnt start. Error code is gone.

    After that vagcom gave me error code:

    18010 - Power Supply Terminal 30: Voltage too Low

            P1602 - 35-10 - - - Intermittent

    This error code usually comes after disconnecting the battery.

    but just to be sure i replaced the battery because it was still a old full calcium one.

    So what i replaced from the ignition : ( new parts )

    Battery , coil pack , spark plugs , engine speed sensor (Crankshaft sensor) (G28), all ignition cables

    No more vagcom codes & car wont start, it just keeps cranking.

    Only thing i can think of now is the starter motor, i dont know if they give error codes?

    what u guys think?

    thanks!

     

     

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept