[Gearbox Help Needed]

Hi all, the gearbox on my Lupo 1.0l engine code AUC has gone and I need a few questions answering: What gearbox code do I need for my 1.0l AUC engine? Will any Polo gearboxes fit my Lupo? And are there any threads that explain how to remove a gearbox from a Lupo? Cheers all, Luke

[Wheel Bearing Help]

Thanks for the help all, really appreciate it  

[Wheel Bearing Help]

Hi all, need to replace the front and rear wheel bearings on my Lupo. Any links and prices? Cheers, Luke

[Rear Wiper Blade?]

Hi all, just wanted to know which rear wipers on other models of VW fit a 1.0 Lupo? Hear about ones like aero blades and things like that but not too sure what I should be looking for. Cheers, Luke

[Reservoir Caps?]

Hi all, looking to improve the appearance on my Lupo in the engine bay and one thing I want to do is upgrade (if possible) the reservoir caps. Has anyone on here done any changes and any ideas/help would be appreciated. Cheers all

[Audi R8 Oil Cap?]

On 11/21/2017 at 2:14 AM, Rich said:

Ainsley will too busy with being a fanny laughing away at his own jokes.

Haha, thanks for the reply anyway Rich mate 

[Audi R8 Oil Cap?]

2 hours ago, Rich said:

yes, makes it quicker too.

Isright. Be smashin Ainsley Harriot in these drag races now then #SpicyMeat #Yeeeeeeeeeeeboiiiiiiiiiiiii

[Audi R8 Oil Cap?]

Hi all, just a dead quick question. Does an Audi R8 oil cap fit a 1.0 Lupo? Cheers all

[Ignition Switch Help]

Hi all, the ignition switch has gone on me Lupo. Just a few questions I need answered: Is it a hard job? Do I need to remove the steering wheel? And finally if I do need to remove the steering wheel, do I need a puller to remove steering wheel spline? Cheers all

[Removing Front Coil Springs?]

Thanks mate, done it in the end haha 

[Removing Front Coil Springs?]

Hi all, I recently bought some lowered coil springs for me Lupo, I have done the back ones but how do you remove the front ones? Cheers, Luke

[Replacing Door Lock Pull Pins]

15 hours ago, 666DUB said:

They are threaded, use a pair of pliers with a bit of cloth so you don't damage the plastic pins ( just in case you change your mind ) a little bit of force is needed to get them started , then just screw off.

Nice one mate

[Replacing Door Lock Pull Pins]

Thanks for the advice. But can someone tell me if they're on by thread or glue. Cheers, Luke

[Replacing Door Lock Pull Pins]

Well fack me sideways and call me Keith. Michael Rosen would be disappointed. #WillHaveToGoOnABearHuntInstead

[Replacing Door Lock Pull Pins]

Hi all, I've just ordered some proper funky dice door lock pull pins, I was just wondering are the original ones on by thread or glue? Cheers, Luke

[WANTED - Metallic Green Rear Bumper for Lupo]

Hi all, is anyone selling a metallic green rear bumper in excellent condition in the Liverpool area? Cheers, Luke

[Lupo 1.0 Complete Coolant Flush Help]

5 hours ago, Sausage said:

Take top and bottom hoses off the radiator and use a hose pipe to flush the radiator until clean and then stick the hose in the other end and reverse flush it, repeat on the heater matrix pipes near the bulkhead (make sure heater is on hot so water flows thru it) and the engine block, you'll probably want to take the thermostat out too while flushing the block.

There's probably some magic mixtures you can put in to help this process but unless it is really bad it's likely not worth it.

Thanks for the reply mate

[Lupo 1.0 Complete Coolant Flush Help]

4 hours ago, Rich said:

I'm Mexican, I spent two days running around with a couple of dishwasher tablets in the tt to flush all the rust out.

I'm English, and I watch Michael Rosen and Ainsley Harriot YTP'S. #GiveYeMeatAGoodOldRub #PlumsAndThings

[Lupo 1.0 Complete Coolant Flush Help]

Hi all, the coolant in my 1.0 Lupo has turned brown. I need to do a complete coolant flush but I've never done one before so can anyone help us and list the process of flushing the coolant in a 1.0 Lupo? Cheers, Luke

[Induction kit for Lupo 1.0]

On 12/5/2015 at 8:55 PM, jparkes43 said:

http://www.opieoils.co.uk/p-65371-kn-57i-performance-air-induction-kit-57-0452.aspx 

 

Hello. I have the 1.4 version in my 1.4 and its quite nice.

 

James

Hi mate, can you show us a picture and what did you do with the breather pipes when converting to the induction kit? Cheers, Luke

[Subs and Amp Recommendations]

Hi all, can anyone give us some advice on what Subs and Amps sound the dogs ****? Wanna make me Lupo proper funky so we can rave our tits off. Cheers, Luke

[Sony Double Din Stereo]

Hi all, would this Sony Double Din stereo fit my Lupo? Cheers, Luke

 http://www.ebay.co.uk/itm/122155750116?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[Hella Light Covers (Indicators)]

16 hours ago, cj1 said:

Hi Luke, am I right in thinking here you mean the ones that act as protective covers when the lights are not in use? 

Presuming yes, then the covers are generally made specifically one size light, maybe, but I'm not sure they would fit. They seem to work by pushing over the light and having some part of the cover going down the side of the light unit, this would not be physically possible with the lights being surrounded by body panels.

Perhaps I have missed something, so please correct me if I have - but in covering any of the indicators, or the front lights, as you suggested you would like to do, the lights in question are rendered useless when the cover is in place.... Also illegal - Although I'm not the fun police - When do you intend to use these? Foglights excluded of course.

 

Hi mate, I was just curious as to see whether or not one of the protective covers would fit either the indicators or the fog lights on the bumper. I think they'd be a boss feature at the likes of a show or suttin like that. Do you have any idea of which model of the hella light cover range would maybe fit either the fog lights on the bumber or indicator? Cheers, Luke

[Hella Light Covers (Indicators)]

Or even the fog lights on the bumper of a Lupo? Cheers, Luke

[Hella Light Covers (Indicators)]

Hi all, just thought I'd ask but does anyone know if you can fit any sort of Hella Light cover what you see on the likes of rally cars? Like do they do small ones which would fit the likes of the indicator? Just really like the look of them. Cheers, Luke