Jump to content

Wolf RS

Members
  • Posts

    90
  • Joined

  • Last visited

Posts posted by Wolf RS

  1. Maybe i am a bit colored :wave:

    But FK AK coilovers has the exact same description as above for the AP.

    So buy cheeper and be happier.

    Earlier i did put my word out for V-maxx.

    They are also much bang for the buck.

    Allthou my new favorit is the AK Street by FK.

    Really nice and very much a nice surprice :clap::thumbsup::yes:

  2. By the way.

    The ride is very good.

    Soft but firm.

    I have lowered about 70-80mm.

    Still have the riser in the back.

    In front there is about 25mm left is i want them.

    But i think this is enough.

    Surprised and pleased!

    I have had many many coilover kits.

    This is very much "bang for the buck".

    Appart from the springspacer , thats in plastic like on JOM:s.

    But hope they will last , im VERY sceptic about them and winter at -35.

    They will crack , i have to get med some spares from FK in aluminum.

    That way i can sleep well knowing that spares are on the shelf if it happens.

    Can really recomend the FK AK kit for the lupo.

    In my eyes the FK gives much better ride than JOM.

    And yes i have had i testride in another Lupo with JOM:s.

    Just sayin anyways :wave:

  3. Done and done!

    Bordom got me started today.

    Sooo...

    2013-09-11203115.png

    2013-09-11151604-1.png

    And a very bad pic of a dirty car.

    Will clean tomorrow and take a pic then.

    I very pleased with the level and look.

    Right on the first try :shades:

    As you can se i ride really bad gravelroads to.

    So more then this is not recomended to lower.

    But ho knows......may happen :clap:

    20130911_200819.jpg

    Just exactly so it dont scrub more then enough.

    Stance is about what i looked for , more then this ia cannot do without sacrificing ride.

    This is my daily ride for me and my little girl.

    38024ddb-bc3f-4cfb-97e4-f78b99410e62.jpg

  4. Garagenight!

    Got the Blueberry cleaned from stickerrests that had dryed and burned stuck to the windows.

    Now its cleaned and some new sticker can go on.

    Some more stickers is going on later.

    Have to get all windoes tinted to.

    Had the rear window toned.

    Soft blue tone film got on.

    2013-09-09233824.png

    Fitted my doughters favorit on the hatch window.

    Manly and very fitting to the car , in pink to :thumbup:

    2013-09-09234021.png

    Finally the tanklid got som stickers to.

    2013-09-09233655.png

  5. 9450198012_e0e33858a8.jpg

    This pic made me atleast google and Ebay for the rims :wave:

    Surprised i haven't had one comment, but oh well im still going to be posting

    I found these for the loop

    9649553493_76a2e00523.jpg

    Always wanted these Audi A8 winter wheels but never seem to find them and then they came up and i did a deal with the owner and 20 pounds of petrol i got them home, There 16" (so same size as whats on mojo at the moment) 5x112 eta 42 7.5J

    and heres how they sit with adapters (wheels are in part refurb)

    Im so happy with the way they sit :yes:

    Front:

    9649553061_3ca6490244.jpg

    Back:

    9649552187_9d74bd0cd2.jpg

    :surprised:

    And now you do this :clap:

    Really nice choice of rims i say!

  6. Got the chance to try the AeroTwin Wipers? I had them on a previous car, liked them, but I heard they don't do good on Lupos

    As i suspected.

    YOU should NOT listen to rumors.

    Works just fine as they have on all my other cars. :clap:

    Now i bought a complete servicekit(wipers x2) with the right mounting.

    It was just fitting them on the car , took 1min aprox.

    Wery happy again.

    There is a big difference to Bosch and the cheeper SH*T thats sold.

    With Bosch you get what you pay for , and on Ebay cheeper than normal.

    There where some cheep Aerowipers mounted on the car when i made the buy , they fly on top of the windshield now wiping at all.

    Now after getting my new wipers it all good again :thumbup:

    This is NOT the last time i buy AeroTwin that's for shure!

  7. Today there was service on the Lupo.

    Airfilter , sparkplugs and wipers changed.

    Filled up to full tank.

    20130830_152610.jpg

    So now it's just a case of driving.

    Going to be mostly mixed drivning in and out och town.

    Exiting to see what the result is.

    The engine is running much smoother and more even.

    So all the service made difference anyways.

  8. As i said , the other day i had the oil and olifilter changed!

    So with that out of the way i wanted to start monitoring the fuelconsumption.

    After the service(light) i checked.

    Drove one full tank and got 0,57L / 10 kilometers.

    That on 16" wheels and at aprox 110kph.

    So now i need to change airfilter , sparkplugs and some other thing.

    Then see if i can get it to go any cheeper before winter.

  9. Had some work done.

    With fever , but i was going crazy at home.

    If after three massive strokes managed to change hinges on Lupo.
    Have you ever made this..... Nahana thought so.
    Without handbook or description.

    Yes the door could be unscrewed.
    Only two external screws so that was easy.

    Then it was time for the hinges.
    They sit with two screws from the door hole.
    BUT ..... right here the engineer HAD A nasty brain hemorrhage at the designingmoment.
    It sits 2 screws from inside the car and they sit really easy to.......NOT!
    It says that one should remove the dashboard ..... to get to the bolts.
    VHAT THE F**K , did it say said it???

    I think NOT I said loudly.
    I refuse to do that, it has to go.
    Bad language a lot over and over :rant:

    Started to remove all plastic fuse box and some other things.

    Then you could get your hands in and see how it would fit with the tools ... in other words not at all.
    Lower bolt went easy after checking how to loosen the handle for hoodopening.
    Then it was just a coverlid and getting the right IN12 key that was needed.

    Upper inside bolt....... damned idiot who installed it there.
    Tear down all the plastic under dash and around the steering wheel and air emission / light switch.
    Then you could see the cover anyway and think out HOW the hell to do.
    Off with the cover and pull lightly at all to see if you could get the board just enough.
    NO it did not work.

    Since all front pockets are completely covered so I came up with a good solution.
    You see nothing behind the trays when they are in place in front of the dashboard.
    Drill was the answer , It solved the problem spot and now sits there the new hinges.
    Now do you get a ratchet in place and just change the hinges!

    No more noice from the doors.

    No pics from changing the checkstrapbusches i'm sorry.

    But they fitted just fin and is now quiet :thumbup:

    20130828_164017.jpg

    20130828_155045.jpg

    20130828_155110.jpg

    So when in need you always come up with solutions :clap:

    And here a pic from when i waited at the garage.

    2013-08-29225810.png

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.