audiocandy
-
Posts
57 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by audiocandy
-
-
Im after a new ALTERNATOR and Belt does anyone have the VW part numbers please for both to fit a VW Lupo 1.4s 16V (75) cheers
-
Seems allot of work to just replace a rubber strap
disappointing can't just replace strap on own . -
How do you go about swopping over the current petrol key lock that's fitted to petrol cap ?
had a quick look but all seems like one peace
-
I've managed to snap my rubber fuel strap that holds the petrol fuel cap when filling up at petrol station? Any idea if these are available from VW and if they can be replaced ? Cheers
-
Have to take a look when removed.as its a pain full stop to remove with the acess to the 10mm bolts that hold glass in place
Is this any good has the clips in kit no idea how you remove them ,http://bit.ly/1bljyo6
-
Yes I have seen the clips at the bottom of the glass think they are a dark grey ,,Im thinking about just swaping the motor over to my old setup assemble as I know that worked up and down just fine until the motor died
is this possible ? -
It was just a recon one second hand the motor operates fine just the fact it doesn't go all the way down left with 2" inch popping out above the door .and when it gets to the bottom and I keep pressing switch no sound thinks its at the correct position end bottom strange ,, no idea which clips to replace?
-
Hi im looking for some help as I recently replaced my drivers side window regulator as it complete stopped working no movement switch is working just fine as tested that first, so I fitted a replacement regulator and solved this and electric window now works well all most
but for some reason the issue the window does not go all the way down there's about 2" inch left sticking out no idea why as ive followed all the steps and fitted same way I took out anyone had same issue or any idea what is coursing this ? thanks-
1
-
-
This just gets better and better with age
must see it in the flesh which shows you at this year ? -
Epic!!! I need to see these in the flesh....Whats your next meet show?
-
Pitty the mirrors not a electric operated setup mate
-
Nice work bud which snow foam lance and product are you using?
-
Im after a accurate reading so I can pin point the fault so im not just buying parts to solve the issue and not just get a code reading that dosent just tell me same any more then the dash warning light does
. Which VAG-COM reader are you reffering to on ebay? -
Hi all im looking for someone in the Midlands who could help me with a fault I have its the exhaust emissions warning lamp that has appeared on the dash
looking for someone who has VAG-COM and help me do a scan track down the fault much appreciated.
-
Hi im after a genuine set of black carpeted VW Lupo floor mats but im struggling to find the correct part numbers for front and rear ,as so far the part numbers ive come across tried so far at VW are discontinued or unavailable as they like to updte change there numbers now days more often
best I come across was only in the slate color can some help me find the correct part numbers please for a plain set with the stud fixing please thanks. -
Success! tiny clip under the far end handle ,then tug like crazy
-
What's the trick to removing the handbrake cover ? Mines stuck on solid can't get off is there any clips or screws need removing first thanks?
-
very nice work mate, now get the ride height sorted
-
Its the early 90's scene all over again
-
Okay cheers for advice love air setup myself ive been debating about it for a while bring a more practual life with a switch of a button so tempting
Im running KW Inox Variant-1 Coilovers at moment ,,I have to see how pans out tomo when take it out for a run Sorry for all questions just used to running larger rims which provide more ground clearance
....Would like to get the rear a little lower all so ive taken the rear adjusters out and still want a little more ,,difficult to find a rear spring thats low enough for the Lupo
-
Cheers Pete for comment I dont suppose you have any pics of your ride with a side profile to guess the gap between the arch/wheel if on same tyres etc.. ,guess its just trial and error then
How dangerous is it if driving at high motor way speeds just as there is a large dip bounce in the road on my daily drive and little worried difficult to avoid think I need air!. Will it hit the roof arch lining before the driveshaft hits ? Is there anything else I should be concerned about with a massive front drop like beaching on speed humps or any damage to under carriage to look out for thanks -
Hi just fitted my spring alloy wheels which are 15" Wheel on 165/50/15 Tyres my concern is how low can I go on front coilovers before chassis notching is necessary? My concern is as how safe it is on deeps and bumps in the road when traveling at speed on motor way
? before drive shaft hits or lower sump hit the ground tips and tricks please thanks.... -
I think standard bolts should be fine but I'm no expert on this so best to ask around to be safe
-
They look interesting! How do you purchase?
Tylers red lupo
in Member's Cars
Posted
Looking very tidy mate liking the BBS RZ look ,get some colour coding done on the handles etc.. look