Jump to content

8ballvmax

Members
  • Posts

    39
  • Joined

  • Last visited

Posts posted by 8ballvmax

  1. hi guys and gals, im having a nightmare trying to find a route for my main 12v power supply, obviously from the battery under the bonnet to the boot where the amp and sub will hopefully live :) just wondered if anyone knows the easiest/quickest way of doing this because i cant seem to find a way without stripping out the whole dashboard :rant: getting very frustrated any any advice would be most welcome :)

    many thanks

  2. hi i have heard about motorcycle airboxes being modded eg just a bigger hole cut out to increase the air flow and wondered if any one with a lup had done it????? rather than an induction kit???? would obviously use a hiflow panel filter eg pipercross etc..... any ideas???? ;)

  3. as far as door locks and window switches go they seem to be a common fault, both my lupos have needed new window switches and lock repair kits :( lock kit is around 7 quid on fleabay, hardest part is actually fitting it (search for guide on you tube) but my mechanic took 30 seconds lol :)

    window switches are simple enough to fit. hope this helps in some way??? but very common and easy to fix faults :) same as bleeeding brakes, either individually or the whole system!!!

  4. hi guys i want to lose the cat converter on my 1.4s, i have looked on ebay and seen stainless manifolds claiming its a decat blah blah...... i thought the cat was somewhere in the pipe section???? im very confused ( doesnt take much lol) and i have also seen on flea bay a decat by-pass pipe for around £20?? very confused???????

    ps not worried about the mot ;)

  5. hi guys both of my lupos 1.4s have started to run really crap on first startup after a few seconds all seems ok?!!! i connected my vagcom thingy and code 036906034AT came up, component MARELLI 4LV ??? any ideas what this component is??

    another code thing iS KWP1281 throttle position actuator (V60) static- output open ???? to be honest its all double dutch to me so any advice would be well received :)

    also im reasonably handy with a spanner lol so is this easy enough to do???

    thanks chaps

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.