Jump to content

sharpelupo

Members
  • Posts

    360
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by sharpelupo

  1. that worked so well was well easy to put on cheers for that probs saved me a fair bit of hasale and money
  2. custom one power flow or something like that? might be your best bet from what iv read up
  3. Got my 100k mark soon on my 1.4 sport dont know weather to be happy about that or not
  4. hi guys today my lupo decided not to start straight away after abit of pumping the throttle she fired up but instantly went to 4k without me touching the throttle, turned off the engine left it for abit started her up again without pumping the throttle and she eventally but slowly fired up, got her round the courner and jump up to 4K again then went back to normal, little more down the road and it starts going between idle and 2k for abit then for a while sat at just over 1k in idle eventally it all went back to normal, went and saw a friend turned her off then later started her up to which it wouldnt start straight away but did after a couple attempts but stunck of petrol, so guys any ideas?
  5. Sweet il give that ago guessing there easy to install
  6. Im not actally sure they came with the car when i got it but iv just looked on the wheels and it says bsa top racing just inside the wheel then it has a sticker sayin cobra on one of the spokes and the center cape says vsb if any of that helps at all?
  7. Hi guys i dont know the name of the panel but its the panel just below the the windscreen covering the wiper motor and linkages, how u remove it as i need to get to the linkage as it keeps poping of so only my drivers side wiper works :@ Cheers guys
  8. hi guys can some one put rota hm3's on this picture just so i get a better idea then the silly little one iv done cheers guys
  9. sweet just wanted to see who else on here was from round here be nice to catch up with any one down here
  10. i drive a 1.4s and its got rear discs but mines the 100bhp versionAny ways i got green stuff pads which help alot as they dont give out alot of dust but they were expensive if willing to spend that sort of money might be worth it?
  11. Its is helpful cheers but im looking at getting the rota hm3s now i think they are the 3 spoke ones got a better offset to so hopfully wont be to bad just might need to roll the front arches a little bit we shall see.
  12. Good thing im aiming to be a little diffrent can alway get it sprayed at any point
  13. hey guys i know this aint the greatest photoshop but it gives the genral idea, so what do you lot think?................ (any one feel free to do a better one if you want?)
  14. haha cheers koop lol :L im not to fussed about the j just iv herd that 8j on the front requires a fair bit of arch work :/
  15. hi guys have a load of trouble finding rota zeros with the red lip in 15x7 any one got any ideas? iv tryed all the main stuff like drift works and rare rims ebay and so on but they cant help any help would be great guys
  16. Cheers koop whats your own personal opinion as to what size to get the cars lowerd not 100% sure how far but if you look on my car in members cars might be able to make a guessamate
  17. Im going to be getting a set of wheels 7j on front and 8j on rear but what size tyre will i need on the back (offset of ET10) i know im going to need some arch rolling want a small amount of strech nothing mental? Cheers guys
  18. Hi is this the 100bhp version if so do u have the rear calipers in good working condition? If you do how much with postage to isle of wight drop me a pm Cheers
  19. finally got round to putting the coilovers on at last think it looks alot better now
  20. thats great cheers silver
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.