[LUPO REAR ADJUSTERS]

I NEED TO PUT THE REAR ADJUSTERS ON MY LOOP..IV BEEN RUNNING IT ON 13'S BUT NOW I WANT MY WINTERS ON AND THEY ARE A BIT BIGGER..JUST NEED A BIT OF DIRECTION AS TO HOW TO PUT THE REAR ADJUSTERS BACK IN.CHEERS JOHN

[I want a Sdi anyone want a 20v Sport Passat saloon or can I buy yours?]

got a sdi for sale mate..£2500 everthing going for it.its in for sale section 202 sdi mattig coilovers or look in my topics.cheers

[Wheel bolts]

also fancy doing a stud conversion..any ideas where to get hold of the gear..cheers

[Wheel bolts]

What size wheel bolts will I need on a 1.7 sdi lupo..mine are looking shabby..I'm going to invest...cheers all

[4 x 100 Black Racing 3 piece JDM split rims]

HI THERE GOT SOME MATTIG SSF MINGHT INTREST YOU...THER 7'S ALLROUND BUT STAGGERED OFFSETS..THE REARS ARE ET 3 WICH SIT AWSOME..THER PAINTED GLOSS BLACK AT THE MO AND ARE IN AVERAGE/GOOD CONDITION...NANKANGS WITH A BIT OF STRTCH ALLROUND..CHEERS

[What makes a GTI?]

well said too many people dont realise the cost involved

[Whats it called]

FOR REAL

[wheel colour!!]

well what wheels are they

[Arch mods]

i still wanna hammer it round corners without them popping off the beads.

CLASSSSSSSSSSY!

[1.7 SDI Options?]

Re-map thats about it dude..without spending silly moneys

[7.5 j and 8 ?]

13S Are the way forward..gets a bit bum twitchy at times but well worth it..commitment! haha

[New On Here]

im from sheffield mate..lupo sdi on coils very low,wide,black mattigs,you will see me scraping about at some point

[rolling arches?]

SCAFFY BAR,HEAT GUN,JACK AND BIG BALLS.HAHA.BE PREPARED FOR PAINT CRACKING!

[New Bodyshop - Club Discounts]

whats ur location mate

[Shows]

id just be happy to be on stands tbh.haha

[Shows]

Nice one that sounds like a plan then

[Shows]

Iv been on here a while now..been modifying the lupo a fair bit and think it's time to take the next step...haha..wanting to come to a few shows..been to a fair few shows before but kinda sick of been stuck in the car park..this may seem like a daft question to the seasoned pros on here but how do I get into the shows with you guys..haha..I no this isn't possible at all shows due to limited space on stands etc but would be nice to get in for a few..the car is presentable..running very very low on coils with13x7 mattigs with a pretty good offset of 3 on the rear...loads of other bits and bobs always kept in good nick..any Info would be great...I'm in sheffield so i'd also like to get 2 some local meets..cheers

[cleethropes show/ MAX'DV CAR CLUB]

id be in mate..keep us posted

[Diy rolled arches]

Thanks for the advice shall bear all that inmind..giving em a go 2morow..wish me luck.haha

[Diy rolled arches]

Need sum tips/tricks to diy roll my arches..need to do em asap!!haha cheers

[Pokeee]

I'll chuck sumat up in about a hour..watch this thread..

[Pokeee]

The top of the tread is just about covered by the top of the arch..reckon that will keep em off my back??cheers

[Pokeee]

Hi all..going to be running a slight amount of poke on the loop..were do I stand with the law..the poke is very slight but if i get a arsey copper..what can I expect??a producer..warning..fine..points??any helps would be great..cheers john

[Any Plumbers]

Hi mate..I work in a plumbers merchant and was a plumber before that..before you change the boiler you could give a pressure equalizing valve a try..£80-£100 usually..failing that a new boiler supplied and fitted you would usually be looking at about £1200 (that's a combi out combi in swap)..and there is no doubt in my mind that vaillant are the best on the Market by a long stretch..if it's a flat you will only need there smallest combi(pro Eco tec 24)..or failing that you can't go wrong with broag and baxi/potterton..hope this helps..cheers john

[teledial tyres]

ok thanks mate..just gives me a rough idea how mine will sit