nfbr Posted May 2, 2010 Report Share Posted May 2, 2010 This information guide has been written by nfbr.Buying replacement Brake parts for the Lupo's can sometimes be a bit of a Nightmare. Especially for TDI owners, as most of the Brake component manufacturers have their listings completely wrong.I have created this user guide to make it much easier for people to Identify and Purchase the correct parts for their car.This guide has been written specifically for the VW Lupo, However as far as I am aware, these specs should be the same for the Seat Arosa.------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Lupo 1.0 - 1.2 TDI 3L - 1.4 16v (75bhp) - 1.7 SDIFront: Vented Discs - ATE Sliding CaliperDiameter = 239mm - Thickness = 18mmFront Brake Pad Diagram:Rear: Drums------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Lupo 1.4 16v Sport (100bhp)Front: Vented Discs - Lucas Sliding CaliperDiameter = 256mm - Thickness = 20mmFront Brake Pad Diagram:Rear: Solid DiscsDiameter = 232mm - Thickness = 9mmRear Brake Pad Diagram:------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Lupo 1.4 TDI (75bhp)Front: Vented Discs - Lucas Sliding CaliperDiameter = 256mm - Thickness = 20mmFront Brake Pad Diagram:Rear: Drums------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Lupo GTi 1.6 16v (125bhp)Front: Vented Discs - Lucas Sliding CaliperDiameter = 256mm - Thickness = 25mmFront Brake Pad Diagram:Rear: Solid DiscsDiameter = 232mm - Thickness = 9mmRear Brake Pad Diagram:------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Please Note: I recommend that you check the Size of your Original discs before you go out and buy new Brake parts as it is YOUR responsibility if you end up with the wrong parts because you didn't bother to measure things up before purchasing! 1 Link to comment Share on other sites More sharing options...
Recommended Posts