sand-r
-
Posts
37 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by sand-r
-
-
I'm back! I actually own an Arosa mk1 sdi.
I'm busy to create the right stance, when i'm happy with that the pics wil follow..
Here's the first :-(
-
Love it mate!
-
1
-
-
Interiour would be 900 euros or if you will swap an original interiour 750 euros
-
Rotas needed some modification to fit, the texts in the inside of the spokes were removed because they hit the brake brackets
-
The car is still for sale.
3l steering wheel 200 EUR
Wheels 700 EUR with brand new federal 165/45
Anyone?
-
Im pretty sure you heat the springs up and then compress them. Should give you even compression over the spring length.
Not 100% on this though.
That's correct. It's done by a spring manufacturer.
Rear lights, talk to me? £?
They go back to the previous owner.
-
Cpall: They are 15'' 8J ET10.
pieface: I've got H4 lamps with yellow caps on it.
-
I'll look for an huge box then
-
The car is for sale, someone interested in some parts? Also got an 3L steering wheel+airbag..
-
This is perfection! Wanna trade?
-
Here you go! It isn't that clean in highres haha. I was at a garage when i saw a friend with an hugeass camera who wanted to make some shots, can't resist that offcourse.
-
My fav GTI I guess, love every single part on little green monster.
-
New pics!
-
I've used 'pressed' springs at the rear. That's all. The roads here ain't that good, but I've got used to avoid potholes so I'm not scraping everywere.
Thanks for the pic! And for all the replies here!
-
I also like this one:
-
-
Ah yeh that is also a problem I had, the plastic bit that was rubbing was a wiring trunk,
Re-route the wiring around the front of the sump is the best bet
Thanks mate, will look after that.
Now I'm rolling on 8J ET10:
-
I'm looking for a 6 speed gearbox.. You have one or you know someone who has one? Let me know!
Cheers!
Sander
-
You have any tips to let the driveshaft 100% running clear?
-
you mean to tell me your frame wasn't notched before??
Haha no! But the noize in the car from the driveshaft when driving wasn't nice either!
BBS wheels are sold, whats next? Wider at the front!
The new shaft hits the plastic on the oil pan? WTF..
-
AGREED!!
get on it mate!!
you have a PM...
im hoping to get over to MIVW
See you guys at MIVW then! Tomorrow someone will come to look after the BBS wheels, so I'll come to MIVW with a different wheel setup I guess!
Your PM didn't arrive mate!
I haven't pics, the rear springs are pressend and I've created camber on the rear axle with some small rings.
Next week: Framenotch! Destroyed my second driveshaft in about 1000km's by driving low haha
-
Get him a sticker!
Haha would be nice!
Thanks for all reply's! When the interiour is ready I'll post some new pics. I hope that will be soon but there are some probs with it.
Are some of you going to the MIVW show in the Netherlands?
-
Thanks all!
I've never been in the UK, 2 other LupoClub.nl members went to early edition so far i know.
Here's a side pic:
-
Hi all,
My name is Sander and I live in the Netherlands, this is my 4th Lupo after a Jazzblue 1L, an uniblack GTI and a Taftgrün 1.4 55kW. Can't get enough of them!
Let me introduce my current Lupo here!
Some facts:
-Lupo 74kW Comfortline
-15'' BBS RS, 7J with 280mm G60 brakes in front, 8J at the rear.
-Details like GTI wipers, yellow lights, ..
To do:
-Framenotch
-Leather interiour with Porsche 924 front seats
Short story, here some pics:
Lupo Sport
in Member's Cars
Posted