-
Posts
24 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by Leww_52
-
-
Okay, so how about the airbag ribbon? It stayed coiled but steering is tight?? When the back "cap" come off with the small black wire... did I get that in right or would that effect it??
Also the small black wire was bent when the clip from the air bag came off... it's cane out to far and bent it?? Would that effect anything also?
-
I completed the wipe stalk today. However.... when i re fitted the steering wheel... the steering wheel is tight and the horn constantly applys lol... What did I do wrong...? Any chance it has something to do with the ribbon behind not being in the right place?
-
I completed the wipe stalk today. However.... when i re fitted the steering wheel... the steering wheel is tight and the horn constantly applys lol... What did I do wrong...? Any chance it has something to do with the ribbon behind not being in the right place? What happened if it does unwind?
-
Car runs fine. Rubbish idle. Thanks alot! I will check them on the weekend:) thank you!!
-
-
Any one got a1.416v throttle body laying around? its the one that is fly by wiring and not the throttle cable driven one.
many thanks
Lewis K
-
Thanks, both!
battery need to be disconnected etc?
-
Any advice? or tips to remove the airbag etc?
Thanks,
Lew
-
Any advice? or tips to remove the airbag etc?
Thanks,
Lew
-
Tbh, I don't really care about performance! I just want it to look nice and sound cool Ha! So any other "sensible" suggestion?
Thanks!
-
Any decent engine mods I can do... any side exhaust you guys can recommend! and just anything else really you guys can suggest!
Thanks!
-
17 hours ago, cj1 said:
Yep
super! Thanks for your help mate! much appreciated!
-
1 hour ago, lupogtiboy said:
085 is a gearbox type for a lot of VW's
Lupos, 6N Polos (tho earlier type 80 Polos also used them)
The differences between most of them is gear and final drive ratios, so potentially if you were to get one meant for a 1Litre Lupo when yours is a 1.4, it may end-up revving higher or lower in top gear, but it will physically fit your car.
So theoretically, I could stick any gearbox code in my lupo? All that's different is the ratios?
-
do you know here there any 085 boxes for sale?
-
2 hours ago, cj1 said:
Sure. Replace it with any 085 box.
Find one you like the look of!
Are the polo boxes the same as the lupo? Thanks! what code would you recommend? i do not mind about what ratios etc, i just want a straight swap so i can use 5th gear again lol. also what gearbox codes go under the 085 spec?
-
Can I remove my FFR gearbox and then refit it with a different code? As from my understand the FFR gearbox are very hard to get hold off...?
-
2 hours ago, cj1 said:
Wouldn't say it's common; but it can happen when you change the box. If the RPM stays the exact same it certainly indicates the selector.
How's your reverse?
the reverse seems fine! its hard to get sometimes but i thought nothing of it... im getting a terrible whine at the moment too, so i think the bearings are going also!
-
1 hour ago, lupogtiboy said:
You sure the adjustment on the selector isn't out? Could be you are actually selecting 4th when it shows as 5th if its out of alignment.....
is this a common problem?
-
how easy is it to check the alignment? worth a try!
-
Hi,
I am looking for an FFR gearbox for my 1.4s Lupo. I am finding it very hard to source one. 7
The issue with my box is that it has recon box in when i bought it. when i change into 5th gear, it is the exact same as 4th gear. therefore, it stays at the same RPM and screaming its nuts off.
any help would be greatly appreciated.
Lewis s
How to remove a Wiper stalk
in Volkswagen Lupo
Posted
Okay thank you! So just remove the air bag and try to re install it but do not push it in to far?
And what do I need to do with the fuse??
You are legit my god.