[What is this car?]

rear arch/bumper line gives it away as lupo/arosa

[My Volkswagen Fox R! ;)]

the garage has proabbly quoted the insurance company for new wing new door rear quarter repair and full respray of the whole side, so probably quoted high 3 figures maybe even 4, , so u can see where theyre coming from,

but to do yourself all that damaged could prbably be prepared without replacing panels, and a side respray could be repaired for around 500 quid, depending where you go,

[Blueline venom coilovers]

is there enough room up where the shock goes up into the boot for that?

[Blueline venom coilovers]

removing the adjuster and cup gets most people the lows they look for, and to match the front,

fk rear coilover springs are shorter again, and as mention if you want lower again its custom springs

[Identify these wheels please]

i bored out a set of mini wheels which als have 56.1 bore i had a a hub centric spacer lying so just kept grinding it out with a flap wheel till it fitted snug took about 10 minutes a wheels but mines where rally wheels so im gussing the alloy was a lot harder than normal road wheels,

[Picture of the day]

there was another a little further up, but i think it was still in use i started walking over prob around a half mile down the river but i noticed it lit up and seem to be a small hut of some kind at the end, so just turned back.

[Picture of the day]

jettie at Portencross Ayrshire, managed to get this before it absolutely started lashing it down.

[Wheels: safe sizes without arch work]

keep close to et35 15's no wider than 7j and no higher than a 45 profile tyre and you shouldnt have any issues with rubbing

[Static+]

its an air adjustable top mount essentially,

[Bolt on wheel arches]

the bumper is a smoothed standard mk2 arosa bumper

[Recently lowered and chewing my tyres]

well yowl need new tyres at least, your toe will be incredibly out combined with the camber thats why its worn so badly on the inside edge

[Porsche 996 turbo alloy wheels (twist)]

artec do 4 stud wheels n a similar style, artec PA think they are called

[Had some free time (3D/Vray)]

youve fair come on! textures look spot on.

[paint]

the c pillars are fabric, can buy fabric dye in an aerosol now id try that

[Wheel help/advice]

some smaller tyres on those wheels would look ten times better,

[Wheels]

providing their not for mk3 gti theyll fit fine

[Banded steels]

offsets is a bit low on such narrow wheels once the reach a normal width the offset will be realy low, once banded to 7j they will be near enough a zero offset so will probably be a bit poky at 7j never mind 8j

[A friend of mine drew my car...]

looks like its melted.

[Picture of the day]

taken from my facebook so pics a bit lacking in color from the upload

[dash bits]

id sand it wth higher than 1200 go with 2000+

i ddnt have orange peel as i used matte black whch lays very flat

excuse my typing my `eye` key and my `yew` key dont work and spellcheck doesnt catch all my mistakes

[Wheel rubbing on arch]

whats so manly about havng tyres foulng your bodywork, such a stupid statement, if you want to run low wth wide wheels, then make it safe to do so, by having the arch lips folded back,

[bumper smoothing]

very little properly adheres to plastic, welding is the only option to do it properly

[Mk4 Golf Gear Knob & Gaiter?]

yes.

[Polo gearstick gator]

itll fit yes, yoll jst need to change the plastic ring the gaitor fits arond, i have a mk4 golf gaitor,

[Swirl removers]

machine polish and get some filler based polishes for black cars, becase no matter how well yo look after it, paint is soft and it iwll return, bt the fillers in the polishes will do a good job of masking them a bit