Jump to content

watkins4378

Members
  • Posts

    42
  • Joined

  • Last visited

Previous Fields

  • Currently Driving
    lupo/ arosa tdi project planned. injectors/ turbo/ intercooler/ clutch/ gti interior/ roll cage

watkins4378's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Hi, I heard the tdi engine is 127 kg but not sure of the weight of the 1.6 gti does anyone know the weight. Best wishes
  2. Hi Treblet, I can't get your link to work. If the suspension is anything like a lupo 1.4 tdi I drove it bounced almost like a trampoline. I heard the tdi engine is 127 kg but not sure of the weight of the 1.6 gti does anyone know the weight. Best wishes
  3. Hi, As the title does anyone know of the weight of 1.6 gti and 1.4 tdi engines. I am thinking about whether the 1.4 tdi would benefit from gti suspension and arb/ strut brace. Oh, better think about some larger runner to.
  4. Hi, it's not a big thing just a change of injectors and see how much the standard turbo copes. Maybe uprate the turbo and keep an eye out on the egt's. Then cheap brakes and the suspension upgrade
  5. Hi, I guesstimated the 1.6 gti engine would weight roughly the same as 1.4 tdi engine?
  6. Hi the atl injectors are comparitively rare compared with asz/ arl 550 injectors. It is possible to add the vg/ n75 code to the ecu but I think it would be more cost effective to 'hybridise' the current electronic wastegate actuated turbo. A USA based forum discussed the option of cutting a runner off the manifold of a 4 cylinder tdi engine but this seems a bit heath robinson to me. I think cylinder head problems are often associated with excessive heat and trying to maximise torque output (via mapping). I would think about either uprating the intercooler or adding water methanol injection system into the inlet manifold.
  7. Hi, yes was going to uprate the turbocharger to 15/49 or hopefully 1749 spec. if possible. It's possible to buy used 550 pd injectors for around 100 pounds a set.
  8. Hi, Has anyone got any thoughts about 'upgrading' the lupo 1.4 tdi by fitting gti suspension shocks and springs. Also, does the gti have front/ rear roll bars that can be fitted. Best wishes
  9. Hi, Has anyone uprated the pd injectors to those found in pd150 engine? is it possible. I would be interested in your experiences. Best wishes
  10. Hi, I will let you know how things go. Starting work next week! Has the car sold? Best wishes John
  11. Hi, apologies the project is cancelled due to job Sorry
  12. Hi, will this brace fit arosa 1.4 tdi plse CHEERS
  13. Hi, i didn't see that have you got a link? Another suggestions is gale banks d max type r see
  14. Hi, I think I should rephrase the question. You see I got quite frustrated by waiting for cars to go over sleeping policeman at around walking pace 3-4 mph that had been lowered and wondered what kind of drop would not make me worried about it scraping the ground Cheers
  15. Hi, as the title says how low can you lower a lupo/ arosa without sleeping poiceman problem - 40mm - 60mm - 80mm. That is, when you have to slow down to less than 20mph Cheers
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.