Jump to content

Clutch and clutch release bearing compatibility.


Recommended Posts

Ok so the gearbox is pretty much finished after 122k miles, pretty sure it's the pinion bearing. Standard symptoms such as incredible whining noise in 3rd 4th and 5th. Need my car as quickly as possible so will replace first with cheap 1.4s box if I can't find a sport one quick enough. Then I will attempt to rebuild my sport box over the next few months then swap them out again. I won't swap the clutch because it was only changed about 20k miles ago but the release bearing is a little noisy so I wanted to swap that. Also the last time I had my gearbox out there is a metal sleeve that sits over the input shaft of the gearbox which if I remember correctly the release bearing fits over. This had worn so badly last time it was rubbing on the input shaft of the box. So my question is, will this sleeve be the same for the sport and non sport box? And are the release bearings the same? I just want to make sure I order the right parts so i don't run in to any problems when taking changing everything over. Also just in general, will there be any compatibility issues with using a non sport box? I assumed that all the 085 boxes would be interchangeable.

P.S. If you have a box in decent condition for sale sport or non sport please pm me.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.