chrisdwalker2002 Posted February 14, 2014 Report Share Posted February 14, 2014 This piece of trim on my arosa doesn't seem to be fitted properly on the drivers side, and as such, is packed with dirt which is now growing moss. Anyone ever had this piece off so I can give it a good clean, and if so any pointers in the best way about it?? Don't fancy pulling and jabbing with a screwdriver in the fear of cracking the window! Cheers Quote Link to comment Share on other sites More sharing options...
Grimmer94 Posted February 19, 2014 Report Share Posted February 19, 2014 I've only done the t section of the car, where vents are and that was a ball ache. Rather you than me :-P Quote Link to comment Share on other sites More sharing options...
Chrisbee Posted February 20, 2014 Report Share Posted February 20, 2014 Just dont drop the inner wing trim bits down inside the wing like I did doh! Quote Link to comment Share on other sites More sharing options...
chrisdwalker2002 Posted February 20, 2014 Author Report Share Posted February 20, 2014 all sorted now. I bit the bullet, gave it a good pull, and managed to give myself enough room to scrape the dirt out. seems the trim was a little bent on the inside which was stopping it from cliping in properly, managed to push in from underneath with the bonnet up and hey presto! all sorted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.