shearermax Posted January 22, 2014 Report Share Posted January 22, 2014 so as above ive been looking around and can only see a how to do it for the gtihas anyone put one on a normal lupo? what does it look like?how did they do it?and what splitter did you use?and how hard is it?thanks guys Quote Link to comment Share on other sites More sharing options...
mattarosa Posted January 22, 2014 Report Share Posted January 22, 2014 I have a Leon Cupra r splitter on mine, dead easy to fit too. Quote Link to comment Share on other sites More sharing options...
shearermax Posted January 22, 2014 Author Report Share Posted January 22, 2014 is the bottom of a arosa bumper the same as a lupo ?? Quote Link to comment Share on other sites More sharing options...
shearermax Posted January 22, 2014 Author Report Share Posted January 22, 2014 ps is it the mk1 leon? Quote Link to comment Share on other sites More sharing options...
mattarosa Posted January 22, 2014 Report Share Posted January 22, 2014 It's the mark one, if you get one you'll need to trim it down, have you had a look on my build thread? It's just attached with some half inch brass screws in my case and I think the bumpers are very similar but the same sizes width and depth. Quote Link to comment Share on other sites More sharing options...
shearermax Posted January 23, 2014 Author Report Share Posted January 23, 2014 cheers matt i will look into getting a cupra splitter Quote Link to comment Share on other sites More sharing options...
mattarosa Posted January 23, 2014 Report Share Posted January 23, 2014 See if you can get a second hand one because they're a bit expensive brand new if my memory serves me correctly, about £70 :0!!! If you need anymore info feel free to PM me. Quote Link to comment Share on other sites More sharing options...
shearermax Posted January 23, 2014 Author Report Share Posted January 23, 2014 yeah ive been looking not much of the but ill keep lookingcheers buddy thanks for the help Quote Link to comment Share on other sites More sharing options...
mattarosa Posted January 23, 2014 Report Share Posted January 23, 2014 No problem, anytime, fitting I'd use somebody to make sure it lines up correctly and something to make a pilot hole with to make securing easier. Quote Link to comment Share on other sites More sharing options...
gnilleg Posted January 29, 2014 Report Share Posted January 29, 2014 The best place to get the cupra r splitter is from a seat main dealer, give them a call and you can pick one up for around £20! The part number is 1ML 805 903http://www.ebay.co.uk/gds/Seat-Leon-Cupra-R-Front-Splitter-Dont-Buy-On-Ebay-/10000000002786925/g.htmlHope this helps! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.