Jump to content

Car Wrapping and Modifications..


Shannon0595
 Share

Recommended Posts

Hi Guys,

Iv got a little red lupo and thinking about getting my roof wrapped,
what would look best, matt black or shiny black?

Also she is standard: any ideas about some modifications i could do?
I am thinking about lowering her but no idea about springs and how much mm etc etc,

All ideas and help welome

:)

  • Like 1
Link to comment
Share on other sites

Roof wrapping is really your choice. There are few which have been done, see if you can find pictures. I personally, if doing it, would go matt or satin.

Lowering: the main decision is springs, springs and shocks or coilovers.

Coilovers are height adjustable, so will let you lower as much as required.

Springs com in various reduced sizes: -30mm, -35mm -40mm, -45mm, -60mm -40\60mm...

Up to -35mm are OK nm standard shocks, more than this an it is recommended that you purchase shorter "sports" shocks.

That said, there are plenty who have run OK on -45mm and even -60mm on standard shocks.

I ran my 1.0 Arosa on standard shocks with AVO -45mm springs for a couple of years. Ride was good, not "crashy" and used the car fully laden with no issues.

3616781333_817022b9b2_o.jpg
Whitesands Bay, June 2009 by Ray Crabb, on Flickr

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.