Jump to content

Tiny - Softblue Lupo 1,4 16V , static ride!


Wolf RS
 Share

Recommended Posts

Today there was service on the Lupo.

Airfilter , sparkplugs and wipers changed.

Filled up to full tank.

20130830_152610.jpg

So now it's just a case of driving.

Going to be mostly mixed drivning in and out och town.

Exiting to see what the result is.

The engine is running much smoother and more even.

So all the service made difference anyways.

Edited by Wolf RS
Link to comment
Share on other sites

Got the chance to try the AeroTwin Wipers? I had them on a previous car, liked them, but I heard they don't do good on Lupos

As i suspected.

YOU should NOT listen to rumors.

Works just fine as they have on all my other cars. :clap:

Now i bought a complete servicekit(wipers x2) with the right mounting.

It was just fitting them on the car , took 1min aprox.

Wery happy again.

There is a big difference to Bosch and the cheeper SH*T thats sold.

With Bosch you get what you pay for , and on Ebay cheeper than normal.

There where some cheep Aerowipers mounted on the car when i made the buy , they fly on top of the windshield now wiping at all.

Now after getting my new wipers it all good again :thumbup:

This is NOT the last time i buy AeroTwin that's for shure!

Edited by Wolf RS
Link to comment
Share on other sites

  • 2 weeks later...

Garagenight!

Got the Blueberry cleaned from stickerrests that had dryed and burned stuck to the windows.

Now its cleaned and some new sticker can go on.

Some more stickers is going on later.

Have to get all windoes tinted to.

Had the rear window toned.

Soft blue tone film got on.

2013-09-09233824.png

Fitted my doughters favorit on the hatch window.

Manly and very fitting to the car , in pink to :thumbup:

2013-09-09234021.png

Finally the tanklid got som stickers to.

2013-09-09233655.png

Edited by Wolf RS
Link to comment
Share on other sites

Done and done!

Bordom got me started today.

Sooo...

2013-09-11203115.png

2013-09-11151604-1.png

And a very bad pic of a dirty car.

Will clean tomorrow and take a pic then.

I very pleased with the level and look.

Right on the first try :shades:

As you can se i ride really bad gravelroads to.

So more then this is not recomended to lower.

But ho knows......may happen :clap:

20130911_200819.jpg

Just exactly so it dont scrub more then enough.

Stance is about what i looked for , more then this ia cannot do without sacrificing ride.

This is my daily ride for me and my little girl.

38024ddb-bc3f-4cfb-97e4-f78b99410e62.jpg

Edited by Wolf RS
Link to comment
Share on other sites

By the way.

The ride is very good.

Soft but firm.

I have lowered about 70-80mm.

Still have the riser in the back.

In front there is about 25mm left is i want them.

But i think this is enough.

Surprised and pleased!

I have had many many coilover kits.

This is very much "bang for the buck".

Appart from the springspacer , thats in plastic like on JOM:s.

But hope they will last , im VERY sceptic about them and winter at -35.

They will crack , i have to get med some spares from FK in aluminum.

That way i can sleep well knowing that spares are on the shelf if it happens.

Can really recomend the FK AK kit for the lupo.

In my eyes the FK gives much better ride than JOM.

And yes i have had i testride in another Lupo with JOM:s.

Just sayin anyways :wave:

Edited by Wolf RS
Link to comment
Share on other sites

Thanks.

There is al lot of things to sort out thou.

Rust and other small things.

I just had i mind to use this as my wintercar and so on.

But it is starting to look a little bit to nice now.

Maybe a respray in the spring........

Yes we will se.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.