Anthony Gaulter Posted June 11, 2013 Report Share Posted June 11, 2013 hi,I am thinking of buying this inlet manifold for my lupo turbo project but not sure if it will fit looks like it will from the photos but wanted to know if any one had fitted this inlet manifold to a lupo 1.4 s ahw engine?it is a polo 6n2 gti 1.6 16v inlet manifold hear are some photos,Inlet manifold by anthony.gaulter, on FlickrInlet manifold by anthony.gaulter, on Flickrany info please 10 Quote Link to comment Share on other sites More sharing options...
ryanlupot Posted June 15, 2013 Report Share Posted June 15, 2013 whats wrong with yours mate? people have used the 1.4 head. a few people have fitted the 1.4 head to the gti engine when boosting. never known anyone to fit a gti manifold to the 1.4 tho. Quote Link to comment Share on other sites More sharing options...
Thissy Posted June 16, 2013 Report Share Posted June 16, 2013 ^ that's an afh head from a polo 6n 1.4 sport.. Totally differnt from a lupo 1.4, cams are in the head rather than rocker cover and has bucket tappet rather than rocker roller set-up. The Gti inlet mani and bigger injectors will see gains after a map but mainly due to the injectors.. Mike Quote Link to comment Share on other sites More sharing options...
Norpan Posted June 17, 2013 Report Share Posted June 17, 2013 I had that fitted in mine a few years ago when i was tuning that little 1,4 AHW ....It has no bracket for the throttlecable cause the polo has flybywire.And when you fit it, remember to take of the negative cable from the battery cause it will sit damn closeto the starters positive cable.I got 105hp with the polo head+manifold+injectors, 1,6 AUS cams, header and remap.A pic of in the car with a homemade bracket for the cable.A pic of the manifold on my Polo gti head. Quote Link to comment Share on other sites More sharing options...
Anthony Gaulter Posted June 18, 2013 Author Report Share Posted June 18, 2013 Well I have got that manifold on now with a 2L throttle body and I have the 1.8t injectors on, all fits well just need to make a bracket to hold the cable Quote Link to comment Share on other sites More sharing options...
ma11b Posted July 5, 2013 Report Share Posted July 5, 2013 On a 1.4 isnt the 2.0l throttle body going to be too big? On a 1.4 isnt the 2.0l throttle body going to be too big? Quote Link to comment Share on other sites More sharing options...
Anthony Gaulter Posted July 18, 2013 Author Report Share Posted July 18, 2013 No I have a 1.6 inlet of a polo fits well Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.