Jump to content

Rear VW badge.


HalKK
 Share

Recommended Posts

Yup, when you take the badge off you'll see it's attached with what look like little plastic rivets, you can carefully drill or melt them, or even carefullier prise it apart with a screwdriver or something, ideally wrapped in cloth, & putting pressure as close to the 'rivets' as possible to pop each one in turn.

Link to comment
Share on other sites

I second what Koops said, I did mine recently, just be careful when you do it. I found a liitle heat from a hot air gun helped a lot to remove the whole thing from the recess.

I drilled mine out to get at the "VW" bit to paint it then glued it back in with a little silicone.

Edited by briaan65
Link to comment
Share on other sites

Yup, when you take the badge off you'll see it's attached with what look like little plastic rivets, you can carefully drill or melt them, or even carefullier prise it apart with a screwdriver or something, ideally wrapped in cloth, & putting pressure as close to the 'rivets' as possible to pop each one in turn.

Is that even a word ?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.