Owenjones91 Posted April 19, 2013 Report Share Posted April 19, 2013 Does anyone know or could anyone advise me how low ill have to go with my 13 inch dished wheels for my lupo , need help asap Thanks. Quote Link to comment Share on other sites More sharing options...
Al3xTee Posted April 19, 2013 Report Share Posted April 19, 2013 Majorly. 1 Quote Link to comment Share on other sites More sharing options...
matt123roll Posted April 19, 2013 Report Share Posted April 19, 2013 87.546mm on the front5" on the back2343ft on the sides 1 Quote Link to comment Share on other sites More sharing options...
Owenjones91 Posted April 19, 2013 Author Report Share Posted April 19, 2013 I Just bought coil overs and the max is 80 , so would that be low enough or would i still have alot of arch gap? Quote Link to comment Share on other sites More sharing options...
matt123roll Posted April 19, 2013 Report Share Posted April 19, 2013 If you're going from the manufactures specs they will go lower than 80mm. There specs just mean they are TUV approved up to 80mm but that's german legislation in the real world they will go to around 100-110mm which will be plenty. If you want to go lower cut your bumpstops and remove the helpers. Quote Link to comment Share on other sites More sharing options...
Pete Posted April 19, 2013 Report Share Posted April 19, 2013 If you don't want arch gap just get bigger wheels?? Quote Link to comment Share on other sites More sharing options...
Al3xTee Posted April 19, 2013 Report Share Posted April 19, 2013 13s are hard to make look right Quote Link to comment Share on other sites More sharing options...
Deadmetal Posted April 19, 2013 Report Share Posted April 19, 2013 (edited) Wind the fronts all the way down, only use the spring (no adjuster) on the back.See that it's still not low enough, take helpers out of fronts, order custom rear springs.Enjoy your back breaking ride whilst looking awesome. Edited April 19, 2013 by Deadmetal Quote Link to comment Share on other sites More sharing options...
Owenjones91 Posted April 19, 2013 Author Report Share Posted April 19, 2013 Im just going to sell my 13" wheels and buy 14" instead, so much hastle! Thanks anyway guys Quote Link to comment Share on other sites More sharing options...
y412 jsh Posted April 20, 2013 Report Share Posted April 20, 2013 i had 13" on my old lupo and dropped 70mm all round and it was fine... 1 Quote Link to comment Share on other sites More sharing options...
LupeCeeJay Posted April 20, 2013 Report Share Posted April 20, 2013 running 13's on my lupo sport, all i needed was spacers to clear front and rear calipers... camber my rears and front (easy enough to do) to fit the tread under the arches (13s, 7J, ET0, 18mm spacer) .... no rolled arches, cups out, cut my bumpstops... hardly any arch gap looks amazing and is really low!!! Quote Link to comment Share on other sites More sharing options...
Owenjones91 Posted April 21, 2013 Author Report Share Posted April 21, 2013 Cheers everyone! I dont know what to do, i think ill just try it out and if all fails ill sell them! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.