avatar Posted April 16, 2013 Report Share Posted April 16, 2013 would a polo 6n2 glovebox fit? and how hard are they to fit? Quote Link to comment Share on other sites More sharing options...
lupo1.0se Posted April 16, 2013 Report Share Posted April 16, 2013 Currently redoing the instructions at present. 1 Quote Link to comment Share on other sites More sharing options...
lupo1.0se Posted April 16, 2013 Report Share Posted April 16, 2013 With a lot cutting it fits reason able. You need to cut everything up to the lid. (See picture below) Also you need the centre dash bit from the 6n2. you will require this later. (Red lines represent cut lines)Then you need to unscrew and cut the pocket (one big piece that go to the other side) To centre console.Then you will end up with piece you will require.Behind this you have part of the dash you need to cut outOn the glove box I would recommend cutting the end down a bit to fit more flush.Then the bottom part is best to cable tie - saves drilling. the top part i would recommend screwing a piece of wood because the screw locating holes are different on the 6n2 to Lupo. See picture below of nearly finsied result. 2 Quote Link to comment Share on other sites More sharing options...
avatar Posted April 16, 2013 Author Report Share Posted April 16, 2013 brilliant thank you! x Quote Link to comment Share on other sites More sharing options...
Pete91 Posted April 16, 2013 Report Share Posted April 16, 2013 Nice how to mate Quote Link to comment Share on other sites More sharing options...
Dblock Posted April 16, 2013 Report Share Posted April 16, 2013 Very nice! Quote Link to comment Share on other sites More sharing options...
Skezza Posted April 17, 2013 Report Share Posted April 17, 2013 Wow, that looks fantastic. They should have bloody included one as standard! But that looks excellent. Quote Link to comment Share on other sites More sharing options...
Pete91 Posted April 17, 2013 Report Share Posted April 17, 2013 I think the way it doesn't line up would annoy me A glovebox would be feckin awesome though. I think the alternative for me is a roof box... Quote Link to comment Share on other sites More sharing options...
lupogtiboy Posted April 17, 2013 Report Share Posted April 17, 2013 isn't the Lupo boot about the same size as a glovebox? LOL!!Seems like a lot of work to me..... Quote Link to comment Share on other sites More sharing options...
Pete91 Posted April 17, 2013 Report Share Posted April 17, 2013 My boot is full of ICE so nae use Quote Link to comment Share on other sites More sharing options...
Skezza Posted April 17, 2013 Report Share Posted April 17, 2013 I think the way it doesn't line up would annoy me A glovebox would be feckin awesome though. I think the alternative for me is a roof box...I think you have to compromise with these things, I wouldn't mind the gaps as much as some. The only thing, would it affect the release of the airbag? Quote Link to comment Share on other sites More sharing options...
lupo1.0se Posted April 17, 2013 Report Share Posted April 17, 2013 isn't the Lupo boot about the same size as a glovebox? LOL!!Seems like a lot of work to me.....The glovebox isn't too bad. It is no where near as bad as Peugeot 308. The only thing you can fit in that glovebox is the instruction manual! Quote Link to comment Share on other sites More sharing options...
Skezza Posted April 17, 2013 Report Share Posted April 17, 2013 The glovebox isn't too bad. It is no where near as bad as Peugeot 308. The only thing you can fit in that glovebox is the instruction manual!Ever seen a Ford Ka ? Quote Link to comment Share on other sites More sharing options...
avatar Posted April 18, 2013 Author Report Share Posted April 18, 2013 smart car? Quote Link to comment Share on other sites More sharing options...
harrysteele9 Posted April 18, 2013 Report Share Posted April 18, 2013 Doesn't look right to me? Quote Link to comment Share on other sites More sharing options...
avatar Posted April 18, 2013 Author Report Share Posted April 18, 2013 what doesnt look right? Quote Link to comment Share on other sites More sharing options...
Pete91 Posted April 19, 2013 Report Share Posted April 19, 2013 The way it hangs down a bit Quote Link to comment Share on other sites More sharing options...
lupo1.0se Posted April 19, 2013 Report Share Posted April 19, 2013 The way it hangs down a bitThat is because I think when I took this picture I did not secure the top. Sorry about that. Quote Link to comment Share on other sites More sharing options...
Skezza Posted April 19, 2013 Report Share Posted April 19, 2013 Take another picture with it secured Quote Link to comment Share on other sites More sharing options...
harrysteele9 Posted April 19, 2013 Report Share Posted April 19, 2013 Agreed ^ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.