Skezza Posted February 21, 2013 Report Share Posted February 21, 2013 V-Reg Lupo, I only have the single DIN slot cup holder. I spotted a HOW TO on the archive for fitting Twin Cup Holders underneath, is this a realistic possibility? Has anyone done this? On my old Lupo, I had vent fitted cup holders but they were a bit shakey :Recommendations Quote Link to comment Share on other sites More sharing options...
lupo1.0se Posted February 21, 2013 Report Share Posted February 21, 2013 Yes it is realsitic. Silver has done this.You need to remove the coin tray which you raise some plastic. Repeat for the cup holder asnd put in the coin tray slot. Quote Link to comment Share on other sites More sharing options...
JoeA Posted February 21, 2013 Report Share Posted February 21, 2013 Yeah, you may have to shift your hazard switch though! Quote Link to comment Share on other sites More sharing options...
Skezza Posted February 22, 2013 Author Report Share Posted February 22, 2013 OK, so if I simply replace the drop down compartment with one from the newer style Lupo, what should I do with the hazard and Demister, mount them below? Quote Link to comment Share on other sites More sharing options...
VolkswagenDan Posted March 5, 2013 Report Share Posted March 5, 2013 I've swapped a coin tray to a cup holder before. It's fiddly but worthwhile. Quote Link to comment Share on other sites More sharing options...
Skezza Posted March 5, 2013 Author Report Share Posted March 5, 2013 No no, I don't want to swap the tray the cup holder, I want to swap the under dash switches to a cup holder + tray. Can it be done? Quote Link to comment Share on other sites More sharing options...
StuntCodpiece Posted March 5, 2013 Report Share Posted March 5, 2013 Aronix has a twin cupholder, got it off Dubmuffin - seeing them both at lunchtime so I'll ask them Quote Link to comment Share on other sites More sharing options...
Skezza Posted March 5, 2013 Author Report Share Posted March 5, 2013 Stunt, it looks like you're doing the same as me, so can you let me know. Basically, I want to remove the bank of switches and replace them with a drinks holder plus coin tray. Not sure what I'll do with the bank of switches just yet, I'll work something out though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.