Karl_Mac_ Posted February 11, 2013 Report Share Posted February 11, 2013 Hi all,recently upgraded the Lupo head unit, but i've noticed when I remove they, it 'resets' and I have to reprogram all my settings and go through the set up program again.Any ideas? Quote Link to comment Share on other sites More sharing options...
Grim reefer Posted February 11, 2013 Report Share Posted February 11, 2013 Yeah, take the head unit back out and swap the yellow and red wires round, so yellow into red and red into yellow. some cars are the opposite way round, Quote Link to comment Share on other sites More sharing options...
SupermanDan01 Posted February 11, 2013 Report Share Posted February 11, 2013 (edited) Which wires? coming out of the headunit? Or coming from the car?As i have this problem too Edited February 11, 2013 by SupermanDan01 Quote Link to comment Share on other sites More sharing options...
Grim reefer Posted February 11, 2013 Report Share Posted February 11, 2013 Which wires? coming out of the headunit? Or coming from the car?As i have this problem too On the ISO plug that comes out the back of the unit and plugs into the cars loom, they should have a bullet and hole connector so you can just pull them out and swap them over, alternatively you can wire both red and yellow wires into yellow which will remember the radios presets but you will need to switch it on and off manually. 1 Quote Link to comment Share on other sites More sharing options...
Karl_Mac_ Posted February 11, 2013 Author Report Share Posted February 11, 2013 Yeah, take the head unit back out and swap the yellow and red wires round, so yellow into red and red into yellow. some cars are the opposite way round,Nice one. Will have a bash at that when its not covered in snow! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.