Jared-One Posted February 7, 2013 Report Share Posted February 7, 2013 (edited) Went to fit my shims today at the back then realised my carriers are bolted to the rear beam not on a mount on the hub so when you fit the shim the hubs move but the calliper stays at its orignal angle. Any ideas how I get around this? Thanks Edited February 7, 2013 by Jared-One Quote Link to comment Share on other sites More sharing options...
Jared-One Posted February 8, 2013 Author Report Share Posted February 8, 2013 Heres some photos too show what I mean, don't think i explained it that well..This is a photo from the how to fit shims that on here which shows the carrier behind the stub axle now this is what mine looks like with the carriers attached to the rear beamHow do I go about fitting shims? any help would be great Quote Link to comment Share on other sites More sharing options...
s17hjk Posted February 8, 2013 Report Share Posted February 8, 2013 http://forums.clublupo.co.uk/index.php?showtopic=62035Hope that helps Quote Link to comment Share on other sites More sharing options...
Jared-One Posted February 8, 2013 Author Report Share Posted February 8, 2013 mate Ive used that guide thats where i got the picture at the top from but his mounts for the carriers came off with the stub axel but mine doesn't, mines attached to the rear beam :S Quote Link to comment Share on other sites More sharing options...
s17hjk Posted February 8, 2013 Report Share Posted February 8, 2013 Sorry didn't even see that lol can't offer any advise because was exactly the same as the guide Quote Link to comment Share on other sites More sharing options...
Jared-One Posted February 8, 2013 Author Report Share Posted February 8, 2013 Haha no worries I was hoping it wasn't me being thick Quote Link to comment Share on other sites More sharing options...
Jared-One Posted February 8, 2013 Author Report Share Posted February 8, 2013 Can i grind off..And then bolt me discs on one of these.. Quote Link to comment Share on other sites More sharing options...
Jared-One Posted February 10, 2013 Author Report Share Posted February 10, 2013 Can anyone shed any light on this? Pretty pweaaase Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.