Jump to content

Members ICE install.


Recommended Posts

Photos and Specs Only Please.

A photo only is fine, but it would be good to answer all the common questions, in this post.

When writing specs, please include rms ratings of your amps, and any extra goodies you have helping it along.

If you have a link to your products on line post it and I'll make it look pretty for you if you don't know how.

I will host up to 2 photos for anyone without the use of anywhere.

Tigz

If it is possible could you please resize them to a maximum 800x600 so they will fit in the Page alright.

If you don't know how, I can do it, but I would love you more if I didn't have to :wink:

Please no Spam.

Drop me a pm if you have any comments/queries.

Discussion Thread please use this.

Edited by Tigz
Link to comment
Share on other sites

  • 3 weeks later...

>Tshirt2k's ICE<

Amprack.jpg

Clarion headunit DXZ848RMC

Infinity 65.5 Cs components in MDF mountings 90 WRMS

Crystal Comp 10 in Custom made 0.9 cuft sealed Fibreglass enclosure

Rockford fosgate P8004 amp 2 x 100 WRMS & 1 X 400 WRMS

Info on Rockford fosgate amp can be found Here

rearcarpet.jpg

Edited by Tigz
  • Like 7
Link to comment
Share on other sites

  • 4 weeks later...

Sony F7700 headunit (i know i know, shoot me)

4 Alpine Type S 5x7" Components, unfortunately powered by the headunit

1 Kenwood KAC-PS811D Amp giving 1 x 800rms at 2ohm

2 JL W3v2-D2 subs powered by the Kenwood amp

Dynamat Extreme on the boot floor and wheel arches

Dynamat Original surrounding each component

fiesta8yf.jpg

Link to comment
Share on other sites

  • 1 year later...

Thought id add my ICE here, not a lupo but shows what can be done with a small amount of space-

JVC Headunit with iPod interface

4 Channel Rockford Fosgate Amp, giving Kenwood components 65wrms each and a JBL 8" sub 250wrms.

Flashing tape, eDead, Second Skin as sound deadening/proofing.

Still plenty of boot space left for stuff.

25052007014.jpg

Edited by Tigz
Link to comment
Share on other sites

  • 2 months later...
hi guy's got the gti on sunday, so set about mounting the sub and what not.

system:

vibe black hex 6.5 speakers

Specifications*

BlackHex 6

Type Co-axial

Configuration 2-way

Speaker Size 6.5" (165mm)

RMS Power 100w

Peak Power 300w

Sensitivity 87dB

Frequency

Response 40 - 25,000Hz

Impedance 4ohm

Mounting Depth 76mm

Mounting Diameter 140mm

these really thump, had these in my leon, and put them into my home cinemas speakers.

then the amp

vibe black box 1

Specifications*

BLACKBOX I

Height 50mm

Width 224mm

Depth 177mm

RMS Out @4ohm 2 x 70w

RMS Out @2ohm 2 x 100w

RMS Out @4ohm 1 x 200w

SNR 100dB

Frequency

Response 20 - 20,000Hz

THD 0.05%

Crossover Type LP/HP/Flat

Crossover Range 50 - 5,500Hz

Crossover Slope 12dB

Bass Enhance

(variable @ 45Hz) 18dB

Max Power 400W

kenwood 12" w3009 sub

Size 12 -inch

Impedance 4 ohms

Cone Material Pearl mica IMPP

Surround Material Urethane foam

Sealed Box Volume (cubic feet) 0.8 - 1.5

Ported Box Volume (cubic feet) 1 - 2

Port diameter (inches) 3

Port length (inches) 7

Sensitivity 93dB

Frequency Response 25 - 0.8k Hz

RMS Power Range (Watts) 35-400

Peak Power Handling (Watts) 800

Top Mount Depth (inches) 5 5/16

Bottom Mount Depth (inches) 6 1/8

Cutout Diameter or Length (inches) 11

Vas (liters) 63.93

Fs (Hz) 32

Qts 0.42

Xmax (millimeters) 8

Parts Warranty 1 Year

Labor Warranty 1 Year

cross over just to run the sub gives more tuning, cant remember the make.

head unit sony cdx-ra650 because it has a sub out, and matches the factory dials

DRIVE-S HX

4 x 52 W S-MOSFET power output

MP3 / WMA / ATRAC playback

ID3 Tag display

Full Motion Dot Matrix FL Display

Motorised Motion Blade-plus (Synchronised Flip Front Panel)

24-bit DAC (Digital / Analog Converter)

DSO / EQ7

Parametric EQ3 (3 Band Equalizer)

2 Pre-outs + Dedicated Subwoofer Output

BBE MP Digital - High Definition Sound

WALKMAN / CD Changer Control Ready

IR card remote RM-X151 supplied

Detachable front panel

here are some pics of the sub, i got the cutting diagram from this site

http://www.subwoofertools.com/forum/ported...mp;Fs=&CE=0

its tuned to 45 hertz

Link to comment
Share on other sites

  • 5 months later...

nearly a full kenwood system

kenwood head unit

ipod link

kenwood 6x9's

kenwood 1800w amp (with remote mounted on shelf)

kenwood 12" sub

alpine component door speakers n tweeters

i made the box and shelf

let me know what you think?

DSC00055.jpg

DSC00056.jpg

DSC00025.jpg

Link to comment
Share on other sites

  • 2 months later...
  • 1 year later...

Components:

Rainbow Kick Components @ 100RMS 4ohm

RE MX tunned to 30Hz 1500RMS @ 1ohm, (possibly getting a more powerful amp ;) )

CIMG1658-1.jpg

CIMG1582-1.jpg

Subs been reconned atm

Probably around 120 DB's need to get tested

update of mine

12' RE MX Dual coil with 2000.RMS SPL Dynamics + 12' RE MX 1OHM

-Powerbass & Kenwood amps + 275 Rainbow kick components 400.RMS plus

-Uprating alternator to 150amnps. also adding something for mid bass @ 350.RMS

-optima yellow top

Edited by Tigz
  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

mine

image062nk3.jpg

pioneer headunit - deh-p3600mpb

alpine spr 176a components - 50w RMS with plenty of sound deadining in the doors ----> powered by alpine MRP-T222 two channel amp - 50w per channel at 4 ohms

had alpine type r 1221 12 inch sub (300w RMS) now pioneer tsw 3004 spl (1000w RMS according to google dont believe that for a second though lol) ----> powered by alpine MRD-M605 600w RMS single channel running at two ohms.

Edited by scoobydoo
Link to comment
Share on other sites

  • 3 weeks later...

heres my install in my gti

(now has two 10"s instead of the one you see in the pics)

30052008432.jpg

Clarion: VRX928RVD DVD Headunit

Pioneer: TS-E176C - 17cm Components front and rears

Powered by

Pioneer: GM-6300F Amplifier - 4 channel amp

Pioneer: TS-W257DVC - 10" 1200W subwoofer Dual Voice Coil

Powered by

Pioneer: GM-7300M Amplifier - MONO BASS AMP

Two fuse blocks and a 1.5 Farad Power Capacitor

Phoenix Gold Bass Cube

soon to have another set of components in the boot lid

heres a picture someone took from GTI inters

DSC00861.jpg

Edited by robgti
Link to comment
Share on other sites

  • 3 weeks later...

I don't have any ICE in my Lupo as yet, but got a few bits set up in my Megane.

Its still running the standard six speakers but also runnning a pair of Pioneer 6x9s, Legacy Amp and 12" Vibe sub all running from a Pioneer head unit.

Boot2.jpg

This is the headunit the Lupo will be inherting though -

Pic7-1.jpg

And this is the new head unit I've got sitting waiting to go in the Megane -

152_image_2.jpg

Link to comment
Share on other sites

  • 2 months later...

alright all, thought id stick mine up, got it db tested at trax by DB drag at 145.5 db @ 41hz

alpine 9866r head unit

sun down 2500 amp,

starsound 2000.4 4 channel amp

starsound ssk 165 components

oz audio matrix elite 15" sub, x2

2x yellow top batteries

clifford arrow 5.1 alarm

central and remote central locking being installed,

custom box,

HU

lupoinstall002.jpg

2x yellow tops

lupo013-1.jpg

components (new tweaters mounted in the normal place)

lupo006-2.jpg

subs

SUB001.jpg

SUB003.jpg

custom box

lupo001-8.jpg

amps

lupoinstall004.jpg

retrimed and finished with the odd monkey and banana thrown in!

SDC104841.jpg

thanks alot, hope you like, rich

Edited by little rich
  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

quick look at my install.

Consists of:

mb quartz mq 218.61q components

boston acoustics G2 8" subwoofer

audison spx2 amplifier

tamagotchy 7" screen dvd headunit (has alpine guts!)

has a false floor in the boot which also has the spare wheel still in. sound deadening in the boot and in the doors and throughout the car under the carpet with all the wires running down the centre of the car.

all in all sounds really nice fancy some more bass tho listen to alot of electro, house, dnb and jungle!

Pics!..

BILD0061.jpg

BILD0062.jpg

BILD0063.jpg

BILD0064.jpg

BILD0066.jpg

thanks for looking :)

Link to comment
Share on other sites

  • 4 weeks later...
  • 1 month later...
  • 1 month later...
  • 3 months later...

its a sql set up andy so the fi q dual 2 is running sealed but is being given 1200 at 1 ohm from a DLS A3 its no way as lond as your blt but the sq of the system has to be heard to be appreciated i was gonna compete in emma this year but there are so many vw shows im commited to this year i just couldnt juggle the two, as for the FI one word awesome

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.