caryleighton Posted February 25, 2012 Report Share Posted February 25, 2012 Hey guys, have some lamin-x for my front fogs but obviously have to remove them to apply it. Sorry if this has been asked before, couldn't find it in search, but is it hard to remove the necessary bits to access the lights?Thanks Quote Link to comment Share on other sites More sharing options...
Rowan S Jones Posted February 25, 2012 Report Share Posted February 25, 2012 I would also find this useful as I need to replace one! - also couldn't find it in search Quote Link to comment Share on other sites More sharing options...
looplooplupo Posted February 27, 2012 Report Share Posted February 27, 2012 Mine were a nightmare to get off due to the screws being rusted in. Probably be easiest to take off the lower bumper, unplug the bulb holders and just unscrew the 3 screws holding it in Quote Link to comment Share on other sites More sharing options...
heartagram Posted February 27, 2012 Report Share Posted February 27, 2012 Yep, above method is the easiest. Quote Link to comment Share on other sites More sharing options...
Curtis Posted February 27, 2012 Report Share Posted February 27, 2012 I personally struggled to remove the lower bumper from my arosa, however i managed to squeeze a small socket into place above the fogs, slowly removing them like that without taking the bumper off Quote Link to comment Share on other sites More sharing options...
caryleighton Posted February 27, 2012 Author Report Share Posted February 27, 2012 Thankyou for the advice guys, I took the plunge and applied the lamin-x whilst the lights were in, worked out well Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.