Jump to content

Jenvey manifold , gti bonnet , revo rfx splits


gareth
 Share

Recommended Posts

Jenvey itb manifold for a Lupo gti, for 42-44mm after £100

Gti bonnet needs respray as I rattle can'd black it £70

revolution rfx 3 piece splits all powder coated flat black

15x7 et 18

15x8.5 et 33

The wheels are of an 80s track porsche so are 5 spoke 5x130

These wheels are not perfect as there is some small chip here and there but come with brand new bolts in silver. I rebuilt them but never put a tyre on them so can't vouch if they are air tight!

£350 or £450 with adapters

Link to comment
Share on other sites

ok had a lot of interest but i hadn't been able to get to the internet!

the bonnet had an attempt to weld a half moon in untill my bod shop realised it was ali!

it needs a skim of filler on the oval lip i will try and upload pictures, but it isn't bad at all and it only weighs 5 kg!

if you need me text me on 07515690907

gareth

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.