TWL Posted October 17, 2011 Report Share Posted October 17, 2011 (edited) For sale an Ashley manifold that has covered no more than 1000 miles, I will also include a small flexi pipe as well (not shown in the pics).The de-cat pipe IS NOT INCLUDEDOriginally, to fit the Lupo Sport & Seat Arosa 1.4 16v 100bhp models.This was originally developed by Ashley for use in the Lupo Cup BTC cars.It isn't a cheap modified Polo Gti manifold it is made specifically for these cars & can be utilised in the Lupo Gti models as well.Exc performance gains it has a very light scrape to the underside & has been pressure tested by an ex employee of Blue Flame exhausts & no faults or issues were found.Can be posted but will be £12.50 or collection from Preston Lancashire PR1£140.00 ONO Edited October 17, 2011 by TWL Quote Link to comment Share on other sites More sharing options...
niallod Posted October 17, 2011 Report Share Posted October 17, 2011 would this sit a lot lower than a standard manifold does? Quote Link to comment Share on other sites More sharing options...
TWL Posted October 17, 2011 Author Report Share Posted October 17, 2011 No, its sits similar to the standard manifold. Quote Link to comment Share on other sites More sharing options...
BEP51 Posted October 17, 2011 Report Share Posted October 17, 2011 is that the lambda sensor thread i see poking up on the top? any problems whislt running this with the sensor showing errors? will check with my insurers if they would bother increasing my premiums as it classes as an engine mod with them i think. (they dont increase my premiums for non engine related parts) Quote Link to comment Share on other sites More sharing options...
FrazzleGTI Posted October 17, 2011 Report Share Posted October 17, 2011 like i said in the last post il probably have this if you still have it in a couple of weeks Quote Link to comment Share on other sites More sharing options...
smitty12 Posted October 18, 2011 Report Share Posted October 18, 2011 how would you overcome the lambda sensor? very interested in this! Quote Link to comment Share on other sites More sharing options...
Cooper_GTI Posted October 18, 2011 Report Share Posted October 18, 2011 (edited) how would you overcome the lambda sensor? very interested in this!Theres nothing to overcome? It works fine, i've got one on mine and it certainly adds to the performance! Gives it a lot more in the top end of the revs! Edited October 18, 2011 by Cooper_GTI Quote Link to comment Share on other sites More sharing options...
smitty12 Posted October 18, 2011 Report Share Posted October 18, 2011 Theres nothing to overcome? It works fine, i've got one on mine and it certainly adds to the performance! Gives it a lot more in the top end of the revs!Is there somewhere to plug the sensor in to? Cant see a plug on the pictures? Quote Link to comment Share on other sites More sharing options...
Cooper_GTI Posted October 18, 2011 Report Share Posted October 18, 2011 The pre cat sensor goes into the branch where it leaves the head. The post cat lambda goes in your standard centre section after the cat.He's already stated that this doesnt come with the decat pipe. Quote Link to comment Share on other sites More sharing options...
FrazzleGTI Posted October 18, 2011 Report Share Posted October 18, 2011 what is required to make this fit a gti? if it can be wasy enough fitted il have it if you can maybe meet me halfway or somwhere i live just north of alnwick Quote Link to comment Share on other sites More sharing options...
JamesTdi Posted October 18, 2011 Report Share Posted October 18, 2011 what is required to make this fit a gti? if it can be wasy enough fitted il have it if you can maybe meet me halfway or somwhere i live just north of alnwickFits a gti fine, it just sits a slight bit lower to the ground due to the gti block being lower. Quote Link to comment Share on other sites More sharing options...
tomroberts Posted October 20, 2011 Report Share Posted October 20, 2011 pm'd Quote Link to comment Share on other sites More sharing options...
tog93 Posted November 6, 2011 Report Share Posted November 6, 2011 I will take the manifold if you still got it cheers Quote Link to comment Share on other sites More sharing options...
TomTom Warner Posted November 6, 2011 Report Share Posted November 6, 2011 Hello mate wil this fit a Lupo 1.4 16v s , if it wil I wil take this of u ! Quote Link to comment Share on other sites More sharing options...
TWL Posted November 22, 2011 Author Report Share Posted November 22, 2011 SOLD please delete. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.