aaronhtid Posted October 16, 2011 Report Share Posted October 16, 2011 (edited) Hi,Done a few searches but cant really find what Im looking for. I'm getting a BMC CDA for my GTI. I want the bay to look half decent so I want a setup like this.What do I need to buy and from where etc?Im not really mechanically minded so please bare with me but if explained properly I could take on the task.Cheers Edited November 6, 2011 by aaronhtid 1 Quote Link to comment Share on other sites More sharing options...
aaronhtid Posted November 6, 2011 Author Report Share Posted November 6, 2011 Bump.Anyone wanna help out a fellow forum member. Will reward with tub of celebrations xxx Quote Link to comment Share on other sites More sharing options...
3lward Posted November 6, 2011 Report Share Posted November 6, 2011 Silicone elbow off the Throttle body into BMC, straight silicone joiner into stainless elbow, silicone joiner into what i think is a upside down 45 degree stainless pipe. Quote Link to comment Share on other sites More sharing options...
aaronhtid Posted November 6, 2011 Author Report Share Posted November 6, 2011 Will there be anything on the end of the pipe going downwards?Where shall I post your celebrations lol Quote Link to comment Share on other sites More sharing options...
3lward Posted November 8, 2011 Report Share Posted November 8, 2011 I wouldn't of though so just a opening I've got mine set up the otherside. Quote Link to comment Share on other sites More sharing options...
burningsextornado Posted December 4, 2011 Report Share Posted December 4, 2011 id also be interested on what actual pipes are needed? does the bmc cda kit come with any whatsoever! Quote Link to comment Share on other sites More sharing options...
99hjhm Posted December 4, 2011 Report Share Posted December 4, 2011 For the set-up above you basically need.....1x 65-70mm 90° Silicone elbow.3x 70mm Straight couplers2x 70mm 90° stainless bends0.5M 70mm Stainless tube.All can be found on eBay. Quote Link to comment Share on other sites More sharing options...
aaronhtid Posted December 5, 2011 Author Report Share Posted December 5, 2011 When I bought the BMC the only thing I used that came with the kit was the actual carbon air box and the jubilee's.These pics are just quick snaps on my iphone.I know the bay needs detailed and will be done after xmas. Quote Link to comment Share on other sites More sharing options...
burningsextornado Posted December 5, 2011 Report Share Posted December 5, 2011 Ahhh sweet, did u go samco? Quote Link to comment Share on other sites More sharing options...
aaronhtid Posted December 5, 2011 Author Report Share Posted December 5, 2011 Nah not samco, cant remember what they ate. Their from AP Motorsport Quote Link to comment Share on other sites More sharing options...
burningsextornado Posted December 5, 2011 Report Share Posted December 5, 2011 Cool so that list that 99hjhm made is what you used? Cheers Quote Link to comment Share on other sites More sharing options...
99hjhm Posted December 5, 2011 Report Share Posted December 5, 2011 No I used a load of very different stuff.. that is for the basic install that most people do.The BMC kit is crap. Quote Link to comment Share on other sites More sharing options...
burningsextornado Posted December 5, 2011 Report Share Posted December 5, 2011 Yeee heard that off alot of people tbh! Did you incorporate a catch tank with yours Quote Link to comment Share on other sites More sharing options...
99hjhm Posted December 5, 2011 Report Share Posted December 5, 2011 Yes, just shoving a breather filter on the end of the pipe is a crap idea. Quote Link to comment Share on other sites More sharing options...
burningsextornado Posted December 6, 2011 Report Share Posted December 6, 2011 Yes completely agree. Adds class to the bay Quote Link to comment Share on other sites More sharing options...
patton Posted December 15, 2011 Report Share Posted December 15, 2011 where did you mount your catch can and what way did you plum it in i have one ordered but haven't looked into it yet Quote Link to comment Share on other sites More sharing options...
GTIWOLF Posted June 24, 2013 Report Share Posted June 24, 2013 Hi guys really need some help im fitting same set up here a bmc cda,what do people do with the rubber pipe that goes onto the stock airfilter housing? Also what do you do with the plastic bottle thing thats behind the head light sitting inside the wing? Thanks Quote Link to comment Share on other sites More sharing options...
JoeA Posted June 25, 2013 Report Share Posted June 25, 2013 The plastic bottle thing is the carbon canister.As for the crankcase breather, you can plumb it in to a t section of piping or a tap into the side of one the silicone pipes Quote Link to comment Share on other sites More sharing options...
GTIWOLF Posted June 27, 2013 Report Share Posted June 27, 2013 Cool so what do i do if i want to remove the carbon canister to allow me to run a pipe down to the bumper vent? Quote Link to comment Share on other sites More sharing options...
JoeA Posted June 27, 2013 Report Share Posted June 27, 2013 (edited) You use the search because I'm sure there's a tutorial somewhere on it by 99jmh Edited June 27, 2013 by JoeA Quote Link to comment Share on other sites More sharing options...
Owen33 Posted July 2, 2013 Report Share Posted July 2, 2013 To get the carbon canistor off, you lower your car, you try to park it but fail and mount bumper on the kerb, rip entire bumper off whilst reserving off. Then a couple of days later you'll find yourself driving over the canister.then just join the two pipes together that would be in the canister 1 Quote Link to comment Share on other sites More sharing options...
JoeA Posted July 2, 2013 Report Share Posted July 2, 2013 To get the carbon canistor off, you lower your car, you try to park it but fail and mount bumper on the kerb, rip entire bumper off whilst reserving off. Then a couple of days later you'll find yourself driving over the canister.then just join the two pipes together that would be in the canisterI did this Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.