dave2468 Posted July 17, 2011 Report Share Posted July 17, 2011 Hello,I have the door card off at the moment, but am trying to figure out how to remove the door handle to fix the lock with a kit ive got.Any idea's gladly appreciatedThanksDave Quote Link to comment Share on other sites More sharing options...
northwick Posted July 17, 2011 Report Share Posted July 17, 2011 Look in at the bit of the door that goes into the shut. There is a blanking plug above the latch. Remove it and use a hex/torx bit to loosen the screw off. Then the handle becomes looser so you can remove. DON'T undo it completely or it all falls apart and is a nightmare to reassemble. Quote Link to comment Share on other sites More sharing options...
dave2468 Posted July 17, 2011 Author Report Share Posted July 17, 2011 have undone the torque screw nearly all the way and handle is a little loose but does not want to budge anywhere Quote Link to comment Share on other sites More sharing options...
northwick Posted July 17, 2011 Report Share Posted July 17, 2011 (edited) The smaller lock barrel bit should come out for your to work on. If you are just fixing the lock you shouldn't need to remove the whole handle? Edited July 17, 2011 by northwick Quote Link to comment Share on other sites More sharing options...
dave2468 Posted July 17, 2011 Author Report Share Posted July 17, 2011 stop the press managed to remove lock Thanks all Quote Link to comment Share on other sites More sharing options...
stator Posted March 4, 2014 Report Share Posted March 4, 2014 Needs three hands to get it out doesn't it Good luck repairing the lock, I just did mine, found some of the parts in the repair kit weren't quite the right size Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.