Robbo87 Posted February 22, 2010 Report Share Posted February 22, 2010 Word on the street is that a mk3 VR6 short shifter will fit a 1.4 sport mechanism??my mate has one in his polo GTI any confirmation? 1 Quote Link to comment Share on other sites More sharing options...
99hjhm Posted February 22, 2010 Report Share Posted February 22, 2010 (edited) Word on the street is that a mk3 VR6 short shifter will fit a 1.4 sport mechanism??my mate has one in his polo GTI any confirmation?Well philplop has a Golf Mk4 B&M quickshift in his GTI, thats what they must use in Polo GTI's. Seem to be very hard to get hold of.No idea if this is the same as a VR6.I was looking at one of these.....http://cgi.ebay.co.u...E:X:RTQ:GB:1123After some research, the Golf/Bora Mk4 4Motion shifter(Stick) is the same one as a 5 and 6 Speed Lupo GTI, the seller tells me it will fit a 4Motion car. Different part number to a Lupo Sport though.Might be alot of effort for no result. Edited February 22, 2010 by 99hjhm Quote Link to comment Share on other sites More sharing options...
Whiny 77 Posted February 22, 2010 Report Share Posted February 22, 2010 I would like one for my sport but don't know if it would fit yeah me too, I'd love a quick shifter but they don't do them for a sport & it's abit of an expensive gamble to take. Quote Link to comment Share on other sites More sharing options...
breamy Posted February 22, 2010 Report Share Posted February 22, 2010 the mk4 ones def fit a gti i have one on mine got it from jabbasport. rang them and it was in stock next day. this was a while ago though Quote Link to comment Share on other sites More sharing options...
veedubdude Posted February 23, 2010 Report Share Posted February 23, 2010 From what Id read on other people fitting them, they didnt make that much difference on the lupos? Have a search as Ive read a thread about it on here quite awhile ago now. Quote Link to comment Share on other sites More sharing options...
breamy Posted February 23, 2010 Report Share Posted February 23, 2010 that was on a 5 speed works on the 6 as well i beleive Quote Link to comment Share on other sites More sharing options...
PaperWeight1 Posted February 23, 2010 Report Share Posted February 23, 2010 Phil has one on his I believe and didn't make a great deal of difference. Quote Link to comment Share on other sites More sharing options...
99hjhm Posted February 23, 2010 Report Share Posted February 23, 2010 After more research, Polo 6n2 GTI people use a Mk3 Golf B&M quickshift. The Polo GTI shifter is the same as a Lupo with cable change gearboxes(Not rod change and not GTI/TDI) Should fit a AUB engine code Sport then? Quote Link to comment Share on other sites More sharing options...
TomStevo Posted February 24, 2010 Report Share Posted February 24, 2010 if the mk3 b&m will fit a sport surley it will fit a 1.4 non sport? there the same box just diferent ratios aint they? 1 Quote Link to comment Share on other sites More sharing options...
99hjhm Posted February 24, 2010 Report Share Posted February 24, 2010 if the mk3 b&m will fit a sport surley it will fit a 1.4 non sport? there the same box just diferent ratios aint they?Tell me the engine code, i will check. Quote Link to comment Share on other sites More sharing options...
alexscotty Posted March 7, 2012 Report Share Posted March 7, 2012 ive just bought a mk4 gti quickshift and it look exactly the same or very similar. only thing is i just found a video if it being fitted to a golf and its a lot more work than i anticipated. you have to unbolt it from underneath by the looks of it which requires removing the centre section of the exhaust and heat shield ect. can anyone tell me if this is right ?? Quote Link to comment Share on other sites More sharing options...
Philplop Posted March 7, 2012 Report Share Posted March 7, 2012 Yeah, you need to undo the centre section of the exhaust and take it off the hangers to drop it down, remove the front and centre heat shields, pry the bottom of the shifter box off and unclip the shift rods. Then get inside the car and swap the shifter over, then back underneath and refit everything. It's not actually as bad as it sounds. I swapped mine back to standard last week in an hour. Needs to be up on four axle stands or ramps though. Quote Link to comment Share on other sites More sharing options...
alexscotty Posted March 12, 2012 Report Share Posted March 12, 2012 cheers mate,helps to know that your going about it the right way and it wont be a waste of time trying it out will get it over the pit sometime soon Quote Link to comment Share on other sites More sharing options...
Anthony Gaulter Posted June 7, 2013 Report Share Posted June 7, 2013 dose anyone know if the mk3 b&m shifter fit my lupo 1.4s, 75bhp, AHW engine ? Quote Link to comment Share on other sites More sharing options...
Anthony Gaulter Posted June 7, 2013 Report Share Posted June 7, 2013 or mk4? Quote Link to comment Share on other sites More sharing options...
nellytheelephant Posted June 10, 2013 Report Share Posted June 10, 2013 will the quick shift kit fit a 1.0 auc? Quote Link to comment Share on other sites More sharing options...
Pippard 1.0 Posted July 2, 2013 Report Share Posted July 2, 2013 You won't need a quick shift in a lupo 1.0 lol Quote Link to comment Share on other sites More sharing options...
killsometime Posted July 25, 2019 Report Share Posted July 25, 2019 Could someone tell me what quick shift i can get for a 1,4 Lupo S . getting it ford and adding a 0.5 bar of boost super changer from a amr 500. but cant find a quick shifter and can anyone recommand me Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.