nayr Posted December 30, 2009 Report Share Posted December 30, 2009 Any how-to's?Been fiddling with it for the past hour, and i cant get my elsawin to install.Help appreciated 2 Quote Link to comment Share on other sites More sharing options...
CasperGTI Posted December 30, 2009 Report Share Posted December 30, 2009 Here i come to the rescue!Heres a picture of all the screw locations:TO remove the bumper itself you dont have to split it like that, dont worry!You need to remove screws from:4 x in each wheel arch (number 2 in picture)1 x either side up by the headlight (number 19 on picture)3 x under the top grill (number 8)1 x behind each of the lower covers (number 5)4 x plastic clips along the bottom of the undertray (number 6)1 x screw above the sidelight either side (number 9)Then get a small screwdriver behind the washer jet covers and prixe them out a little, grab it and putt right out and disconnect the covers. then undo the screws in the hole attatching the jets to the covers (number 7)From what i can remember thats all you need to take off to get it out. But scan the picture a little more to make sure. Ive only just put mine back on. 1 Quote Link to comment Share on other sites More sharing options...
nayr Posted December 30, 2009 Author Report Share Posted December 30, 2009 Nice one, back to work i go Quote Link to comment Share on other sites More sharing options...
saq85 Posted April 3, 2010 Report Share Posted April 3, 2010 going to do this tomorrow >_< wish me luck! Quote Link to comment Share on other sites More sharing options...
karl Posted January 8, 2011 Report Share Posted January 8, 2011 just finished changing the rad on my GTI thanks to the picture above it made it easy . Quote Link to comment Share on other sites More sharing options...
max West-York Posted February 17, 2011 Report Share Posted February 17, 2011 any chance of a diagram for a non gti? Quote Link to comment Share on other sites More sharing options...
Petemarshall Posted July 24, 2013 Report Share Posted July 24, 2013 Thanks for sharing this it helped me loads, I did notice though on 1 side of my bumper there was a sneaky little screw holding it together to the front wing just under/beside the light, the only way I could get to it was to reach up from the underneath. but the picture above and explanation worked a treat for me, cheers ?? Quote Link to comment Share on other sites More sharing options...
sharpelupo Posted July 24, 2013 Report Share Posted July 24, 2013 what tools are needed? Quote Link to comment Share on other sites More sharing options...
davidelliott294 Posted July 31, 2013 Report Share Posted July 31, 2013 what tools are needed?They are torx screws 1 Quote Link to comment Share on other sites More sharing options...
Mobieus_uk Posted April 3, 2017 Report Share Posted April 3, 2017 printed off as think i need to remove bumper soon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.