Jump to content

Removing the front bumper


 Share

Recommended Posts

Here i come to the rescue!

Heres a picture of all the screw locations:

N63-10056.png

TO remove the bumper itself you dont have to split it like that, dont worry!

You need to remove screws from:

4 x in each wheel arch (number 2 in picture)

1 x either side up by the headlight (number 19 on picture)

3 x under the top grill (number 8)

1 x behind each of the lower covers (number 5)

4 x plastic clips along the bottom of the undertray (number 6)

1 x screw above the sidelight either side (number 9)

Then get a small screwdriver behind the washer jet covers and prixe them out a little, grab it and putt right out and disconnect the covers. then undo the screws in the hole attatching the jets to the covers (number 7)

From what i can remember thats all you need to take off to get it out. But scan the picture a little more to make sure. Ive only just put mine back on.

  • Like 1
Link to comment
Share on other sites

  • 3 months later...
  • 9 months later...

just finished changing the rad on my GTI thanks to the picture above it made it easy .

Link to comment
Share on other sites

  • 1 month later...
  • 2 years later...

Thanks for sharing this it helped me loads, I did notice though on 1 side of my bumper there was a sneaky little screw holding it together to the front wing just under/beside the light, the only way I could get to it was to reach up from the underneath. but the picture above and explanation worked a treat for me, cheers ??

Link to comment
Share on other sites

  • 3 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.