dodgercannon Posted November 17, 2009 Report Share Posted November 17, 2009 Hi I need some help on what's wrong with my car.I have lowered the Lupo all the way down just, whilst test driving it I get a mad nocking noise... Sounds like a belt is rubbing on the tyre?Has anyone experienced this?I'm on standard sport wheels Quote Link to comment Share on other sites More sharing options...
sheps Posted November 17, 2009 Report Share Posted November 17, 2009 could be tyre on coilover or part of wire loom that goes under one of the driveshafts or arm on chassis. Or loose wheel nuts sounds silly but easily done. hope this is some help. O or brake hose catching wheel. Quote Link to comment Share on other sites More sharing options...
little rich Posted November 17, 2009 Report Share Posted November 17, 2009 ^ as said aboveThis happened to me a few months back, turns out i didnt tighten the wheels back up properly Rich. Quote Link to comment Share on other sites More sharing options...
northwick Posted November 17, 2009 Report Share Posted November 17, 2009 Driveshaft on chassis? Quote Link to comment Share on other sites More sharing options...
dodgercannon Posted November 17, 2009 Author Report Share Posted November 17, 2009 Cheers guys... I forgot to mention it's when I'm idle.But I have raised it up a coil or two and it's stopped... But I can't stand the noise of my drive shaft toutching so il rais it up a bit more tomoz.Why can't we be low without issues :-( Quote Link to comment Share on other sites More sharing options...
sheps Posted November 17, 2009 Report Share Posted November 17, 2009 ^ as said aboveThis happened to me a few months back, turns out i didnt tighten the wheels back up properly Rich.Yep i took my adjusters out on the back earlier in the year before a meet at the rico one eve in my haste to get it back together forgot to fully tighten wheel nuts on one side. Felt like a right berk when i realised what i had done but at least i found out before it caused any damage to anything. Now i doublbe check them when doing anythin to do with wheels Quote Link to comment Share on other sites More sharing options...
oODUBOo Posted November 28, 2009 Report Share Posted November 28, 2009 ^ as said aboveThis happened to me a few months back, turns out i didnt tighten the wheels back up properly Rich. DONE THE EXACT SAME Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.