vworks41 Posted July 21, 2008 Report Share Posted July 21, 2008 I've been looking at some bbs rm's in 8x15 and 9x15's with 2 and 3'' outers.I think the offsets are around et13 front and et8 back. I've also had all four arches de-liped and rolled and i'm 70mm-ish down.so what ya reckon folks? Quote Link to comment Share on other sites More sharing options...
scoobydoo Posted July 21, 2008 Report Share Posted July 21, 2008 its more like et1 on the 9s. it has been done before think blackrat sent me the pic of his mates car (on old computer though unfortunatly).dont no how much his arches were pulled by or anythin. i thought they looked to wide at the time but havnt seen the pic for donkeys. Quote Link to comment Share on other sites More sharing options...
vworks41 Posted July 21, 2008 Author Report Share Posted July 21, 2008 its more like et1 on the 9s. it has been done before think blackrat sent me the pic of his mates car (on old computer though unfortunatly).dont no how much his arches were pulled by or anythin. i thought they looked to wide at the time but havnt seen the pic for donkeys.Ok cheers man. Quote Link to comment Share on other sites More sharing options...
Clairey Fairy Posted July 21, 2008 Report Share Posted July 21, 2008 I hope they do rub Just so you cant have another set of gorgeous wheels Quote Link to comment Share on other sites More sharing options...
vworks41 Posted July 21, 2008 Author Report Share Posted July 21, 2008 I hope they do rub Just so you cant have another set of gorgeous wheels I could always hang them on the wall in my living room if they did Ummm BBS Quote Link to comment Share on other sites More sharing options...
scoobydoo Posted July 21, 2008 Report Share Posted July 21, 2008 u need to stop arsing around and get some real dishes Quote Link to comment Share on other sites More sharing options...
vworks41 Posted July 21, 2008 Author Report Share Posted July 21, 2008 Yeah baby!!! do you think 195's would stretch Quote Link to comment Share on other sites More sharing options...
Lupo D Posted July 21, 2008 Report Share Posted July 21, 2008 I think that best measures on 15" are 7,5J and 8J...!Too much "high" the wheel...!With 8J and 9J you can play with 14" or 13"...!Cheers,D. Quote Link to comment Share on other sites More sharing options...
v3rmin Posted July 21, 2008 Report Share Posted July 21, 2008 i had 7.5's on mine and they rubbed would probly been ok with better bump stops, i think 8's on the rear would be fine but 9's doubtful Quote Link to comment Share on other sites More sharing options...
vworks41 Posted July 21, 2008 Author Report Share Posted July 21, 2008 So do most rm's have an offset of et35 before wider outers? Quote Link to comment Share on other sites More sharing options...
v3rmin Posted July 21, 2008 Report Share Posted July 21, 2008 From memory it's ET33, that's with a standard 0.5" dish Quote Link to comment Share on other sites More sharing options...
vworks41 Posted July 21, 2008 Author Report Share Posted July 21, 2008 From memory it's ET33, that's with a standard 0.5" dishOk cheers Quote Link to comment Share on other sites More sharing options...
vworks41 Posted July 21, 2008 Author Report Share Posted July 21, 2008 Found a pic of these which are 8.5x15 with a 2.5''dish. Standard arches to....ummm. Quote Link to comment Share on other sites More sharing options...
v3rmin Posted July 21, 2008 Report Share Posted July 21, 2008 thats wideeee! 9's are gona be too much i think it will lose the stance. I would just make the 9's 7.5 and then run 7.5 up front and 8 out back Quote Link to comment Share on other sites More sharing options...
scoobydoo Posted July 21, 2008 Report Share Posted July 21, 2008 id try 8 up front and 8.5 rear. that would look the nuts. Quote Link to comment Share on other sites More sharing options...
GTi T Posted July 22, 2008 Report Share Posted July 22, 2008 Buy them vworks41!!!!!!!!!!!!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
vworks41 Posted July 22, 2008 Author Report Share Posted July 22, 2008 Still seriously thinking about it, but need to sell another set before i can get buy them.Anybody what a set of 8x18 Zenders Quote Link to comment Share on other sites More sharing options...
Clairey Fairy Posted July 23, 2008 Report Share Posted July 23, 2008 No but i'll take the Borbet As and the 'Dials Quote Link to comment Share on other sites More sharing options...
vworks41 Posted July 23, 2008 Author Report Share Posted July 23, 2008 No but i'll take the Borbet As and the 'Dials More wheels are on hold now, got rear ended today poor loop Quote Link to comment Share on other sites More sharing options...
v3rmin Posted July 24, 2008 Report Share Posted July 24, 2008 More wheels are on hold now, got rear ended today poor loop GUTTED!!! hope it gets sorted mate Quote Link to comment Share on other sites More sharing options...
Clairey Fairy Posted July 24, 2008 Report Share Posted July 24, 2008 Oh noes Hope it wasnt too bad? If i see the pillock who did it, me and snowy will squish them Quote Link to comment Share on other sites More sharing options...
vworks41 Posted July 25, 2008 Author Report Share Posted July 25, 2008 GUTTED!!! hope it gets sorted mateOh noes Hope it wasnt too bad? If i see the pillock who did it, me and snowy will squish them Cheers peeps.Fortunately no panel damage, just nakered bumper, bent number plate and marks on the tail pipes.Just waiting for the insurance to sort it out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.