Jump to content

Casper's Supercharged GTi - MK Indy Hayabusa Turbo - 413bhp/243ftlb


CasperGTI
 Share

Recommended Posts

Oh its sorted, its alot to take in. In principle its going to work, jsut getting it to work will be the hard part.

I need to make sure the system is safe, dont get me wrong i havent ordered a cheap kit what so ever! Just with running the ignition advance i will be able to, i have to make sure the failsafes will work.

I have EGT sensors to keep an eye on the engine and sence pre det. Then the injection system has failsafes for low fluid, high pressure and low flow, which will be sent on a pulse wire to my ecu which will automatically switch maps back to a safe map.

Mapping time is going to be high on it though, alot of time is going to be needed i think.

Going to make sure everyting is ready before i go fo fitting the kit, im expecting it to arrive in the next few weeks. Im pretty excited as its one of only 35 kits in the world atm.

John

Link to comment
Share on other sites

Cheers pic, and everyone else too for the comments

Just ordered some original bbs valve caps just to finish them off!

Ive gone to town on them, people are saying too far.

Lined the falken badge on the tyre up with the valve

The valve runs horizontally with the bbs logo in the centre

Every bolt is pointing in the same direction, bbs logo on the outside.

have i gone to far?? nah!

Link to comment
Share on other sites

Cheers pic, and everyone else too for the comments

Just ordered some original bbs valve caps just to finish them off!

Ive gone to town on them, people are saying too far.

Lined the falken badge on the tyre up with the valve

The valve runs horizontally with the bbs logo in the centre

Every bolt is pointing in the same direction, bbs logo on the outside.

have i gone to far?? nah!

Glad your taking my advice John :coffee:

Lining the logo up on the tyre is just sad though. :lol:

They do look great, can't wait to see them at UD's.

Link to comment
Share on other sites

Chevy orange centres? I do like that.

In a total sick lovely person fashion, I'm thinking it would look ace with some GT3-ish, or even Mopar-esque orange graphics down the side... if it was done as subtle as orange graphics could be, it could look alright.

Or maybe I should lay off the prescription drugs right now.

Link to comment
Share on other sites

Well, after a hard weekend she is back home and the paintwork is fully machine polished up and ready for UD, engine bay still to be detailed and interior to be detailed.

The paint is good, but its not 100%. It will be going back again to have panels done again when i have to time.

Looking froward to Ud now, its gonna be good fun.

Pics to follow...

Link to comment
Share on other sites

Few shine photos, and some close ups of the paint. Nothing special.... Had driven 50 miles since cleaning it too.

Will be fitting the wheels on weds, along with a new abs sensor as i managed to take the end off it with a long wheel bolt!..... ooops

IMG_4927.jpg

IMG_4923.jpg

IMG_4922.jpg

IMG_4921.jpg

IMG_4956.jpg

IMG_4953.jpg

IMG_4955.jpg

Oh yeah and this turned up.... Not a bad way to spend £500 :o:ph34r:

IMG_4961.jpg

IMG_4957.jpg

IMG_4959.jpg

IMG_4960.jpg

IMG_4958.jpg

John

Link to comment
Share on other sites

Yeah it has, But its not sunk

Its becasue of the intercooler, it pushes the bottom out ever so slightly which puts dimples in it either side. When the bumper is off there not there. but as soon as it goes back on they re appear.

Ive tried taking material off the inside of the bumper, and have taken all i can off. One of these things you have to live with.

John

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.