James_VW Posted July 23, 2021 Report Share Posted July 23, 2021 Im after a clutch return spring part number 6N2 721 403 I believe they are the same on Lupo GTI Lupo TDI Arosa TDI Polo 6n2 TDI Anyone got one of these or breaking any of the models above? Quote Link to comment Share on other sites More sharing options...
Rich Posted July 24, 2021 Report Share Posted July 24, 2021 They are the same. The Korean user is also after one. Can't you rebuild? Quote Link to comment Share on other sites More sharing options...
James_VW Posted July 24, 2021 Author Report Share Posted July 24, 2021 Thought so, confirmed looking at ETKA. At least there is some chance of getting one... The only thing I am now finding with the GTI's is literally everything is obsolete from VW! Nope, tried the zip tie trick but slipped. Found the spring and 1 plastic half (which is cracked) and the other is somewhere in the garage never to be found... lol Might look at getting the special vw tool (3317) to help get it back in. The reason it is out is because I had to weld up the pedal, common vw fault apparantly Quote Link to comment Share on other sites More sharing options...
Ttazic Posted July 24, 2021 Report Share Posted July 24, 2021 Hi I have a lupo tdi that I'm breaking I believe that clutch pedal in it was working fine I could tryn remove it if your interested. Thanks Coll Quote Link to comment Share on other sites More sharing options...
Ttazic Posted July 27, 2021 Report Share Posted July 27, 2021 Quote Link to comment Share on other sites More sharing options...
Rich Posted July 28, 2021 Report Share Posted July 28, 2021 I welded that clutch pedal. Quote Link to comment Share on other sites More sharing options...
ObjectiveAway Posted July 28, 2021 Report Share Posted July 28, 2021 According to european parts provider there are more than 1000pcs of 6N2 721 403 available. Quote Link to comment Share on other sites More sharing options...
James_VW Posted July 29, 2021 Author Report Share Posted July 29, 2021 I finally have a clutch again! Managed to source a spring locally. Got the 3371 tool but is far to big lol, luckily got it for not too much. So had to try the zip tie trick again. 2 zip ties nice and tight around the spring and twisted tight with pliers. Then i still had to compress it a little to get into place. Once in place used a set of small side cutters and stanley knife to cut the zip ties. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.