kurt7 Posted August 31, 2020 Report Share Posted August 31, 2020 (edited) Iv Just spent last 3 days doing pedal box . Test drive and brake sticks down when pressed also ignition coil light comes on when driving need new clutch switch Is there a correct position for the return spring I got a new brake pedal with new Spring does it clip into anything? Thanks for any ideas Edited August 31, 2020 by kurt7 Quote Link to comment Share on other sites More sharing options...
mk2 Posted September 1, 2020 Report Share Posted September 1, 2020 If it sticks, my guess is that something hasn't been put back right. The plunger should travel in and out quite easily, with the pedal connection point at the centre of the pivot. So when off, it should be slightly high, when pressed slightly low. Is the brake servo working ok? 1 Quote Link to comment Share on other sites More sharing options...
kurt7 Posted September 1, 2020 Author Report Share Posted September 1, 2020 (edited) yep it's like hit the brakes then I have to flick it back up with my foot , brakes working ok plastic cover was cracked over brake plunger, is there a way to make a rod to replace existing one so I don't have to remove and refit box 😟 Edited September 1, 2020 by kurt7 Quote Link to comment Share on other sites More sharing options...
kurt7 Posted September 1, 2020 Author Report Share Posted September 1, 2020 Going try get 2 sex bolts ( they got tread inside ) 40mm fuse box side and 80 mm clutch side and chop and drag old bolt out , Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.