kt_lou_gti Posted June 10, 2020 Report Share Posted June 10, 2020 Hi Guys, need to pick the collective brains. Have a problem with the air conditioning on a GTI, it was checked and recharged last March and seemed Ok through the summer but now fails to produce cold air. Compressor engages and the fan kick in as it should. I've had a garage take a look and they're saying there's evidence of a small refrigerant leak in the hose which contains the pressure switch. Cost all in, in excess of £500. The hose is on back order from Germany, so do I bite the bullet and spend the money or try and source a second hand hose? your collective thoughts please .... and NO keeping the windows open in the long term isn't an option before anyone says 😀 Quote Link to comment Share on other sites More sharing options...
mk2 Posted June 10, 2020 Report Share Posted June 10, 2020 Hose or pipe? Pipe could be tig welded. It'd be fairly easy to make a hose if you go to someone like Pirtek. But I guess it needs to be ac hose, not hydraulic. I'm sure most industrial refrigeration specialists would be able to knock one up while you wait. Something like a tenner... Quote Link to comment Share on other sites More sharing options...
kt_lou_gti Posted June 10, 2020 Author Report Share Posted June 10, 2020 3 minutes ago, mk2 said: Hose or pipe? Pipe could be tig welded. It'd be fairly easy to make a hose if you go to someone like Pirtek. But I guess it needs to be ac hose, not hydraulic. I'm sure most industrial refrigeration specialists would be able to knock one up while you wait. Something like a tenner... That's a thought, haven't seen the pipe myself as its under wheelarch, they said pipe not hose and I wondered whether using second hand hoses for A/C would be wise or false economy. Quote Link to comment Share on other sites More sharing options...
Rich Posted June 11, 2020 Report Share Posted June 11, 2020 I have some. Quote Link to comment Share on other sites More sharing options...
kt_lou_gti Posted June 11, 2020 Author Report Share Posted June 11, 2020 6 hours ago, Rich said: I have some. That sounds hopeful Rich, from th description they gave I'm thinking its pipe 7 on the diagram. Quote Link to comment Share on other sites More sharing options...
Rich Posted June 11, 2020 Report Share Posted June 11, 2020 It's still in the car. Gimme a week or so as it's not easy to get out. Quote Link to comment Share on other sites More sharing options...
kt_lou_gti Posted June 11, 2020 Author Report Share Posted June 11, 2020 44 minutes ago, Rich said: It's still in the car. Gimme a week or so as it's not easy to get out. Cheers Rich, I'll have a look this weekend to confirm exactly where the leak is 🙂 Quote Link to comment Share on other sites More sharing options...
Rich Posted June 11, 2020 Report Share Posted June 11, 2020 I don't know the feasibility of fitting it with an engine in mind. Quote Link to comment Share on other sites More sharing options...
kt_lou_gti Posted June 11, 2020 Author Report Share Posted June 11, 2020 8 minutes ago, Rich said: I don't know the feasibility of fitting it with an engine in mind. Ahhhh ..... might have to live with the windows open in the summer 🤣🤣 I'll have a good look in the next few days and check the routing. Quote Link to comment Share on other sites More sharing options...
Rich Posted June 11, 2020 Report Share Posted June 11, 2020 Under the engine mount bracket. 1 Quote Link to comment Share on other sites More sharing options...
RAB Posted June 23, 2020 Report Share Posted June 23, 2020 I wouldn't mind betting that the pressure switch has failed and is giving a false high reading. If you just had a leak (and low pressure), the fan wouldn't run. The pump always runs (even when A/C is off) unless the safety "clutch" has failed, which happens when the pump has seized. RAB 1 Quote Link to comment Share on other sites More sharing options...
Rich Posted June 23, 2020 Report Share Posted June 23, 2020 Service union under the brake servo. 1 Quote Link to comment Share on other sites More sharing options...
mk2 Posted June 23, 2020 Report Share Posted June 23, 2020 If pipe 5 in the drawing gets hot when the pump is running (ac selected), it means you're compressing gas, so you 'should' get some cold. @RAB is right about the switch though. There's a high low switch which cuts off the compressor (to avoid damage). Too high- off. Too low- off. Somewhere inbetween - on. The clutch should engage and disengage as you select AC. You can see the flat plate bit, furthest from the pump, in the middle of the pulley. When off, it shouldn't turn. When on, the electromagnet pulls on it engaging the plate clutch. Very simple system. Usually the bearing wears out before the compressor packs up. New compressor seals are about £3- little ceramic graphite things, a bit like a ceramic tap valve. My bet is that the evaporator (bit inside the car is clogged with gunge= low air flow), or like you say lowish gas. The fan should run when ac is on. 1 Quote Link to comment Share on other sites More sharing options...
kt_lou_gti Posted June 24, 2020 Author Report Share Posted June 24, 2020 Thanks for the help guys, I've spoken with the guy who checked the air con and he's saying there's evidence of dye in two places .... above and below the pressure switch, I ran out of time to jack the car and check myself but am wondering if this is a leak from a holed pipe or as @RAB says a failing/failed switch spraying a mist onto the pipe. Engaging the A/C gets a noticeable change in engine note followed shortly after by the fan kicking in. When the system was recharged last year it worked well and over the year became less effective (though used less). Thanks for tip @mk2 I'll check pipe 5 for heat. Being of a certain age I tend to not to walk under ladders etc but note that the pressure switch seal is numbered 13 ...... I wonder??🤔 Quote Link to comment Share on other sites More sharing options...
RAB Posted June 24, 2020 Report Share Posted June 24, 2020 There's no clutch on the pump. When the A/C is off, the pump still runs but at a minimum level, determined by the swash plate. RAB 1 Quote Link to comment Share on other sites More sharing options...
mk2 Posted June 24, 2020 Report Share Posted June 24, 2020 Ah, ok, it's one of those compressors... In that case, check the power feed to the control valve, going into the back of the compressor. It's the thing that sets how much volume the pump displaces (how much it compresses per rev). Disregard my previous post, as that applies to the other type of compressor. @RAB is right as usual. 1 Quote Link to comment Share on other sites More sharing options...
dirk1978 Posted June 25, 2020 Report Share Posted June 25, 2020 So the GTI has a variable displacement compressor? I thought they were quite a recent thing. Quote Link to comment Share on other sites More sharing options...
mk2 Posted June 25, 2020 Report Share Posted June 25, 2020 6 hours ago, dirk1978 said: So the GTI has a variable displacement compressor? I thought they were quite a recent thing. Me too. @RAB has played with way too much mechanical stuff obviously... Merc only started using them around 2002, so obviously vdub thought that the lupo gti was a worthy candidate. Polos and golfs of that era certainly have the old clutch system. I don't like them. It doesn't rest well with me, that the complete internals are spinning away at the same RPMs as the engine, and not doing any work. Nothing wrong with the old clutch design that's been around for decades. Clunky, not elegant, but works very well. My fav are the vane compressors. Hardly any moving parts and ever so reliable. Smaller too. Quote Link to comment Share on other sites More sharing options...
dirk1978 Posted June 25, 2020 Report Share Posted June 25, 2020 7 minutes ago, mk2 said: Me too. @RAB has played with way too much mechanical stuff obviously... Merc only started using them around 2002, so obviously vdub thought that the lupo gti was a worthy candidate. Polos and golfs of that era certainly have the old clutch system. I don't like them. It doesn't rest well with me, that the complete internals are spinning away at the same RPMs as the engine, and not doing any work. Nothing wrong with the old clutch design that's been around for decades. Clunky, not elegant, but works very well. My fav are the vane compressors. Hardly any moving parts and ever so reliable. Smaller too. My 2007 early mk2 Octavia VRS had them and the aircon guy who replaced the whole system when it failed described how they worked to me because they were fairly new. Quote Link to comment Share on other sites More sharing options...
RAB Posted June 26, 2020 Report Share Posted June 26, 2020 I'm wrong! I was making the assumption that Lupo A/C would be the same as Audi A2's; not unreasonable? The Lupo clutch is, according to Etka, electro-mechanical whereas the A2 has no clutch. The Up is the same as the Lupo. Never make assumptions! RAB Quote Link to comment Share on other sites More sharing options...
mk2 Posted June 26, 2020 Report Share Posted June 26, 2020 (edited) 10 hours ago, RAB said: I'm wrong! I was making the assumption that Lupo A/C would be the same as Audi A2's; not unreasonable? The Lupo clutch is, according to Etka, electro-mechanical whereas the A2 has no clutch. The Up is the same as the Lupo. Never make assumptions! RAB Now that @RAB has achieved 'wrong' status, i think we need to ask @MattyB to upgrade him to 'premium' membership. What d'ya think peoples? Edited June 26, 2020 by mk2 Quote Link to comment Share on other sites More sharing options...
Rich Posted June 26, 2020 Report Share Posted June 26, 2020 No Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.