Jump to content

Drivers window won't go down 100% - advice required!


Will Cheyney
 Share

Recommended Posts

Hi folks.

The drivers side electric window in my Lupo won't go all the way down. It works faultlessly otherwise. It doesn't get stuck, the motor doesn't click. But it stops about three quarters of the way down as if it's reached the bottom.

I've tried a new switch. Inside the door I've checked the rails and they're nicely lubricated and the sliding white clips aren't broken or dislodged.

 

Has anyone else experienced this? What is the likey culprit? I could replace the regulator but don't know whether to buy a kit that also includes a replacement motor or not.

 

Any advice would be greatly appreciated.

Edited by Will Cheyney
Link to comment
Share on other sites

if it goes up and down the same speed as the drivers door, then follow @Rich 's advice.

If it kinda slows down just before stopping, it could be nothing more than the glass felt tracks need some silicone oil spray lube. That often helps. If you've had it in pieces, you'll see that there's not much that can go wrong- if all the plastic bits are ok.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.