Jump to content

Clutch issues on TDI


weslangdon
 Share

Recommended Posts

Problem is and was a soft pedal and excessive travel, changed slave and master cylinder with new ones but the problem persists. after a while the pedal firms up,😣😄 after a quarter of an hour or so, I'm mystified as the clutch isn't slipping or dragging and the gear change is as good as it was after the box was rebuilt 3 years ago. Any ideas out there?

Link to comment
Share on other sites

Yes - reverse bleed is definitely the best

i overcame my clutch bleeding saga using pump oil can - you want the pump lower than the slave, connect with hose to nipple, prime hose to remove as much air as possible -then you just pump keeping a close eye for bubbles at the reservoir. Before starting drain reservoir.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.